It will be a little bit short of an acre. An acre contains 43,560 square feet. The conversion says that it would be closer to 210 by 210.
No, but it is 0.92 of an acre, approx.
No
1 acre = 43,560 square feet200-ft x 225-ft = 45,000 square feet = 1.033 acres (rounded)
Approximately 17.2% of an acre.
43.56 parcels of 100 x 100 squares will fit in one acre.
1 acre = 43,560 square feet 0.27 acre = 11,761.2 square feet A few plausible sets of dimensions for the lot: 75 x 159 98 x 120 100 x 118 107 x 110
No
1 acre = 43,560 sq ft; 100 x 200 = 20,000 sq ft or .459 acre
1 acre = 43,560 square feet200-ft x 225-ft = 45,000 square feet = 1.033 acres (rounded)
One acre has 43,560 square feet. Divide the number of square feet by that and you get the number of acres. This gives you an answer of .748 acres.
First of all, lets calculate the area of this piece of property. Remember that Area = Length x Width. Area = Length x Width Area = 250ft x 200ft Area = 50,000 ft2 (square feet) Assuming the traditional American measurement, an acre is equal to 43,560 ft2. So now lets use a simple converstion formula. 43,560 ft2/1 acre = 50,000 ft2/X acre 43560X = 50000 X = About 1.15 acres
First of all, why do you assume that the acre is rectangular? An acre can be circular of octagonal or a completely irregular shape. Next, even if you are told that the shape is rectangular, there is no way to distinguish between a near-square shape and a long thin shape. One third of an acre = 14520 sq ft. So it could be 120 ft x 121 ft or 1 foot x 14520 ft or 1 ft * 2.75 miles or 1 inch x 174242 ft or 1 inch x 33 miles etc
That is a close approximation. An acre contains 43,560 square feet, so half would be 21,780 and this gives you 20,000..
200ft in length x 85ft in width
66yd is greater than 200ft
An acre is 400 sq ft. So, divide the size of the lot (in square feet) by the # of sq ft in an acre and... voila!... the size of your lot in acres! 150ft*200ft = 30000sq ft 30000 sq ft / 42000 sq ft = .71 Acres
One acre has 43,560 square feet. Divide 40,000 square feet by that and you get the number of acres. This gives you an answer of .918 acres.
0.35 of an acre