The answer depends on what causes the difficulty: the steepness or the distance which you have to run.
Slope is equal to rise over run. There are 12 inches in a foot, so 10 feet is actually 120 inches. Therefore, the slope is equal to 1/120.
The applied force will depend on the required force, and the angle to the ramp (or the horizontal) at which the force is applied.
The angle of inclination.
Do you mean the long ramp that you walk down to get from the airport terminal onto the aeroplane which often slopes a little? If so, the correct name is a Jetway.
1. The windshield of a car.2. When water runs down a sink or bathtub.3. When a skateboard runs down a ramp.4. A wheelchair down a ramp.
The maximun slope of an ADA ramp is 8.3% or 12:1.
yes
a ramp
Increase the IMA
it depends...a ramp with transitions at top and bottom can be steeper than one without, because severe change in slope can cause the vehicle to bottom out.
increasing
Changing the slope of the ramp will affect the speed of the vehicle going down it.
Slope is defined as 'rise over run' in other words: take the height of the ramp and divide it by the length of the ramp. This gives you the slope. y2-y1/x2-x1
The independent variable is the slope of the ramp because you vary the slope in the experiment. How far the marble travels is the dependent variable because that is what you are measuring.
Either decrease the slope of the ramp, increase the friction on the axels of the car, or make the tires stick to the ramp in some fashion.
15%ramp is a rise of 15/100 = 0.15 slope angle is inverse tangent of this, or 8.53 degrees
Because an escalator is type of ramp that help other people up \