Imagine a room that measures 25 feet by 20 feet. The area of the floor in that room is 25 X 20 or 500 square feet.
You can't tell the dimensions from the area. There are an infinite number of possibilities. Even if you accept only whole numbers (only feet, no inches), it could be 1 x 500 2 x 250 4 x 125 5 x 100 10 x 50 20 x 25
500 square meters are 5,381.955208 square feet.
700 x 500 = 350000 square feet.
500 (square feet) = 46.45152 square meters.
Multiply the two dimensions to get the area. In this case the calculation gives you 500 square feet.
20 ft * 500 ft = 10000 square feet. Rather a large room!
Imagine a room that measures 25 feet by 20 feet. The area of the floor in that room is 25 X 20 or 500 square feet.
To find the area of a rectangle, you multiply the length by the width. In this case, 25 feet x 20 feet equals 500 square feet. This calculation is derived from the formula for the area of a rectangle, which is length x width. Therefore, the area of a rectangle that measures 25 feet by 20 feet is 500 square feet.
There are an infinite number of feet in a 500 SQUARE feet room.A foot has no width so has zero area and so no matter how many you have you will NEVER cover an AREA of 500 SQUARE feet.
To determine square feet you need two dimensions: length and width. If the fabric is 500 yards long, then it is 1,500 feet long (3 feet per yard). If the fabric is 3 feet wide (36"), then the total is 4,500 square feet, but if it is 5 feet wide (60") then the total is 7,500 square feet.
To find the perimeter of 500 acres in miles, we first need to determine the dimensions of the area. Since 1 acre is equal to 43,560 square feet, 500 acres would be 500 * 43,560 = 21,780,000 square feet. To find the dimensions, we need to calculate the square root of 21,780,000 which is approximately 4,666. Therefore, the perimeter would be 4,666 feet or about 0.88 miles.
10 feet
You can't tell the dimensions from the area. There are an infinite number of possibilities. Even if you accept only whole numbers (only feet, no inches), it could be 1 x 500 2 x 250 4 x 125 5 x 100 10 x 50 20 x 25
The external surface area of a pipe is a rectangle with dimensions of the circumference of the pipe multiplied by the length. 48*pi*500 24000*pi square feet about 7550208 square feet
500 square meters are 5,381.955208 square feet.
Assuming this question refers to square metres and not squire metres, the question cannot be answered in a sensible way. A square metre is a measure of area, with dimensions [L2]. A foot is a measure of length, with dimensions [L]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information.