1is to 200 slope for piping
If you mean points of (1, 5) and (-1, -1) then the slope works out as 3
Points: (1, -3) and (2, -5) Slope: -2
The slope of a line perpendicular to one with a slope of m is -1/m.
Points: (10, 1) and (5, 2)Slope: -1/5
Slope of a line = m slope of perpendicular line = -1/m
4
200/1 rise=200 run=1
The slope of the perpendicular is the negative reciprocal of the slope of a line. In this case, - (1 / -1) = 1.The slope of the perpendicular is the negative reciprocal of the slope of a line. In this case, - (1 / -1) = 1.The slope of the perpendicular is the negative reciprocal of the slope of a line. In this case, - (1 / -1) = 1.The slope of the perpendicular is the negative reciprocal of the slope of a line. In this case, - (1 / -1) = 1.
The fall of the river divided by the distance of the section of the river under consideration would be the slope. For instance, if a river were to drop by 200 feet (-200 feet, that is) over the distance of a mile, its slope would be -200 ft / 5280 ft = -0.038. That slope could also be expressed as a percentage: -3.8%.
For a 200-foot sewer run, a common slope recommendation is 1% to 2% (or 1/8 inch to 1/4 inch per foot). This translates to a total drop of 2 to 4 inches over the entire length. The specific slope may vary based on local codes and the type of sewer system, so it's essential to consult local regulations for precise requirements.
The slope of a line perpendicular to one with slope m is -1/m. So for a line with slope 1/7, any line perpendicular to it will have: slope = -1 / (1/7) = -7
If we call the slope m we can say that the slope of the perpendicular line is -1/m In this case as the slope, m, is 13 the slope of the perpendicular is -1/13 or -0.07692307692
If you mean points of (1, 5) and (-1, -1) then the slope works out as 3
The line perpendicular to a line with a slope of 1/5 has a slope of -5.
Points: )1, 1) and (3, 3) Slope: 1
A slope of -3 is steeper.
the answer is - 1/5