It is the angle between the a tangent to the liquid surface at the interface and the solid surface inside the liquid. For concave surfaces, it is acute .
Contact angle is the angle that a drop of liquid makes as it meets the surface or interface of another phase, usually a solid
Draw a circle with centre O. draw a tangent PR touching circle at P. Draw QP perpendicular to RP at point P, Qp lies in the circle. Now, angle OPR = 90 degree (radius perpendicular to tangent) also angle QPR = 90 degree (given) Therefore angle OPR = angle QPR. This is possible only when O lies on QP. Hence, it is prooved that the perpendicular at the point of contact to the tangent to a circle passes through the centre. Answer By- Rajendra Meena, Jaipur, India. email: rajendra.meena21@gmail.com
A right angle is a angle with 90o
what angle does a hemisphere have what angle does a hemisphere have what angle does a hemisphere have
So basically , you have an right angle and another angle . You draw an right angle over the angle your looking at and if its smaller than the right angle then its an acute angle . If its bigger than the right angle then its a obtuse angle . GoodLuck!(;
The contact angle is the angle in which the liquid interface meets the solid surface. The contact angle should be as small as possible to have an effective penetrant material.
Contact angle is the angle that a drop of liquid makes as it meets the surface or interface of another phase, usually a solid
Angle of contact is the angle between a tangent to the liquid surface at the interface and the solid surface inside the liquid. For concave surfaces, it is acute . For convex surface , it is obtuse.
There are many ways to measure a contact angle, but the simplest way is to use a goniometer. The image of the droplet is taken with a high resolution camera; the angle can then be measured using a protractor.
It is a right angle
The angle of rotation of the balance in which the roller pin is in contact with the pallet forks.
Chien-kuo Yang has written: 'Use of the equilibrium contact angle as an index of contact surface cleanliness' -- subject(s): Contact angle, Surfaces (Technology), Analysis
A right angled triangle has three sides. The naming of these sides is dependant on which angle you are observing. The first side is named the opposite and is the side which is not in contact with the angle that is being observed (each angle is in contact with ONLY two sides) The second side is the hypotenuse which is the side opposite to the right angle. Also termed the diagonal, the hypotenuse is the longest side of the triangle. The third side, the one you are interested in, is the adjacent side which is the angle which is in contact with the angle being observed which ISN'T the hypotenuse or the opposite. It can be determined by a process of elimination in that there are two sides in contact with the observed angle.
zero
0 degree
The angle of friction is the angle at which a body will start sliding on a surface. It is equal to the arctangent of the coefficient of static friction between the two surfaces in contact.
The angle does not hit anything! A ray of light hits a mirror or glass block and the angle that the ray makes with the vertical at the point of contact is the angle of incidence.