If you mean ratio then I don't quite understand the question.. but if you mean RADIUS Then you take the diameter and divide it by two. ============================================== There's no such thing as the ratio of circles. You can find the ratio of their diameters, the ratio of their radiussesses, and the ratio of their areas. -- The ratio of their diameters is: One diameter divided by the other one. -- The ratio of their radiusses is the same number as the ratio of their diameters. -- The ratio of their areas is the square of that same number.
If the ratio is 2 : 7 then the volumes are in the ratio 8 : 343.
The answer depends on whether or not the shapes are similar. If they are, then the ratio of volumes is the cube of the ratio of the linear dimensions.
The ratio of their perimeters will be 3:1, while the ratio of their areas will be 9:1 (i.e. 32:1)
Their perimeters are in the same ratio.
The aspect ratio of a duct can be evaluated as the ratio of width to height. As the aspect ratio increases, vibration noise, friction and cost also increases.
That is a 16:9 aspect ratio.
the correct aspect ratio for 4x3 = 1.333 the correct aspect ratio for 16x9 = 1.777
The aspect ratio is the tires profile. For instance, a tire with a 60 aspect ratio means that the tires hight from tread to rim is 60% of the tires nominal width. The lower the aspect ratio # the wider the tire.
The aspect ratio is the ratio of width to length, in this case either 3:5 or 5:3.
The cast of Aspect Ratio - 2010 includes: Kenji Yamamoto
The answer depends on the ratio of WHAT aspect of Paraguay, and compared to WHAT!
The aspect ratio is 2:3.
Is called the aspect ratio.
Aspect ratio is the ratio of wingspan to chord (front to back of the wing). Alternatively it can be found by (span x span)/ (wing area).
Hypermesh is a high-performance finite element pre- and post-processor for major finite element solvers, allowing engineers to analyze design conditions in a highly interactive and visual environment
In Hypermesh, to search for an element in the mesh by its number, you can use the "Find" function. Go to the "Edit" menu, then click on "Find Entities." Enter the element number you are looking for, and Hypermesh will highlight the element if it exists in the mesh.