0
Hay.
I thick the simplest way of defining the eutectic halt is when a liquid with lets say a slope with like a 45 degree angle slowly moves to 90 and instantly moves to 180degrees (eutectic solidifying) for a long period before cooling further the longest halt will give the eutectic composition and the melting temperature when the slope is equal to zero (horizontally)
Sry
I tried to be simple :D
What else can I help you with?
What is a eutectic?
[http://www.answers.com/eutectic Click here for the answer from Answers.com]
When was Castolin Eutectic created?
Castolin Eutectic was created in 1906.
What is Castolin Eutectic's population?
The population of Castolin Eutectic is 2,000.
What is the meaning of pro-eutectic and eutectic?
Pro-eutectic refers to the phase that forms before a eutectic reaction occurs in a metal alloy. Eutectic refers to the specific composition in an alloy where the solid phases melt and solidify simultaneously at a single, specific temperature.
Are copper and gold eutectic?
No, copper and gold do not form a eutectic system. They have a limited solubility in each other but do not exhibit a eutectic reaction.
What is the eutectic pont?
Eutectic is a binary system of two substances which are miscible in all proportions in the liquid (molten) phase but do not react chemically. They have the property of lowering each others freezing point. The minimum freezing point attained is called Eutectic point and composition corresponding to Eutectic point is called Eutectic mixture. This type of system is called Eutectic system.
What is the difference between hypo-eutectic and hyper-eutectic steel?
Hypo-eutectic steel has a carbon content below the eutectic point, resulting in a microstructure with some ferrite and pearlite. Hyper-eutectic steel has a carbon content above the eutectic point, leading to a microstructure with primary cementite and pearlite.
What is the significance of eutectic point?
The eutectic point of a mixture is defined as the temperature at which a eutectic mixture freezes or melts. A eutectic mixture is a mixture that melts and solidifies at a single temperature that is lower than the melting points of the individual constituents.
What is the difference between eutectic and eutectoid?
Eutectic point is where a liquid eutectic composition cools sufficiently to solidify.Eutectoid point is where, within a solid, the material cools enough to undergo a phase transformation. e.g. austenite to cementite a
What is the difference between eutectic and eutectoid points?
The eutectic point refers to a specific composition in a binary phase diagram where a liquid phase transforms into two distinct solid phases upon cooling. On the other hand, the eutectoid point is a specific composition in a phase diagram where a single solid phase transforms into two different solid phases upon heating.
What has the author Roy Elliott written?
Roy Elliott has written: 'Eutectic solidification processing' -- subject(s): Eutectic alloys, Solidification
How does a eutectic fridge work?
"Eutectic" refers to a mixture or alloy that has the lowest possible melting / freezing point. In a true eutectic solution, all its consituents move from solid state to liquid and vice versa simultaniously as in water. The "eutectic point" is thus the freezing / melting point of the whole solution. The term "eutectic fridge" refers to a fridge that has an internal tank filled with a eutectic solution. The fridge works normally with a compressor and coolant gas, the eutectic solution is not circulated through the evaporator. When the fridge is running, it pulls down the temperature of the eutectic tank solution, which then helps keeping the temperature low even when the fridge is not running. A poor man's eutectic would be putting a lot of bottled water in your fridge and then run the fridge until all the water is cold. Now the cold liquid helps keeping down the temperature, while cold air escapes as soon as you open the door. Eutectic fridges are often used in vehicles and boats that must be self-sufficient with their electricity. The "eutectic plate" is chilled while there is plenty of power (=the engine is running, or the sun hits the solar panels etc. ), thus enabling the user to save power at times when no charge is coming to the batteries.
