You can't tell the linear dimensions from the area. There are an infinite number of shapes that
all enclose 40 acres but have different linear dimensions.
The smallest possible straight dimensions that can enclose 40 acres occur if the field is square.
Each side would be 1,320 feet, and you'd need exactly 1 mile of fence to enclose it.
But if some developer owned a rectangular piece of land that was 330-ft wide and 1 mile long,
his land would also measure 40 acres, but it would take 2-1/4 miles of fence to enclose it.
Can,t convert acres to linear feet. Acres is a measurement of Area, where liner feet is just that: liner. You could ask what is the perimeter of an acre- then you could figure what the linear feet around that acre would be.
You can't convert that.
40 acres.
Answer: 40 acres = 1,742,400 square feet.
Exactly 40 miles. Changing from lower case to upper case does not alter the distance!
An acre is a measurement of area not a linear measurement.
Answer: 1 acre = 43,560 square feet.
It is simply a length of 60 inches.
Acres is an area and feet is a length. That does not go together. "Linear" is an unnecessary word, because all distance measurements are linear. To answer this, 40 acres in a perfect square is equal to 1/4 mile by 1/4 mile, or 1320 ft. by 1320 ft. So if you are asking "what is the total perimeter of 40 acres?" the answer would be 1 mile, or 5280 ft. You may also find acre dimensions measured in rods. 1 rod = 16.5 ft. Here is a handy little link http://www.systemfence.com/images/systemfence/Information_pages/Fence_measurement_Page.pdf
Acres are a measure of area. Linear meters are a measure if length. They are not convertible.
1 acres is 10,000 square meters. 40 acres of the 400,000 square meters. 1 hectare is equal to 2.471054 acres. 98.84216 acres is equal to 40 acres. 0.154440868 square miles is equal to 40 acres.
Acres is an area and feet is a length. That does not go together. "Linear" is an unnecessary word, because all distance measurements are linear.
40 acres = 1,742,400ft²
1,024,000 acres.
Can,t convert acres to linear feet. Acres is a measurement of Area, where liner feet is just that: liner. You could ask what is the perimeter of an acre- then you could figure what the linear feet around that acre would be.
There are 25,600 acres in 40 square miles. This is because 1 square mile is equivalent to 640 acres. So, 40 square miles x 640 acres = 25,600 acres.
40% increase.