The surface area of a cube that has a volume of 27 cubic inches is: 54 square inches.
SA = 54 square inches.
The diameter of a circle with a 27 inch circumference: 27/pi = 8.594 inches rounded
circumference = pi x diameter where pi = 3.14 circumference = 3.14 x 27 = 84.78 inches
The circumference of a circle is calculated using the formula C = π*d, where C is the circumference, π is a constant approximately equal to 3.14159, and d is the diameter of the circle. In this case, the diameter is 84 inches. Plugging this into the formula, we get C = 3.14159 * 84 = 263.89356 inches. Therefore, the circumference of a circle with an 84-inch diameter is approximately 263.89 inches.
The surface area of a cube that has a volume of 27 cubic inches is: 54 square inches.
If 27 inches is the diameter, then that is the diameter. If 27 inches refers to the radius, you must multiply it by 2 to get the diameter.
Measure it with a tape measure.Diameter: the measurement across the widest part of the circle.Perimeter: the measurement around the outside of the pool (take diameter in inches x 3.14)Area: the measurement of the surface of the bottom of the pool (3.14 x (1/2 diameter x 1/2 diameter) [So if you pool is diameter 54 inches it would be: 3.14 x 27 x 27]Volume: the measurement of how many cubic inches the pool will hold (NOT GALLONS)(take area x height)
SA = 54 square inches.
The diameter of a circle with a 27 inch circumference: 27/pi = 8.594 inches rounded
SA = 54 square inches.
27 inches
If by "27 inch wheel" you mean:"a wheel with a circumference of 27 inches" The answer is 27 inches."a wheel with a radius of 27 inches" The answer is 54π inches"a wheel with a diameter of 27 inches" The answer is 27π inches
25 ½ to 27 inches
27 circumfrencee
Wait, what? I believe diameter is the measurement straight across the middle of a circle, not a unit of measurement. So if a circle were to be 27 inches in diameter, it would be 27 inches from one side of the circle to the other, with the line going exactly through the center of the circle. Basically, cutting the circle in half.
Surface area = area of the 27-ft diameter circle = pi R2 = pi (13.5)2 Volume = 4 x pi x (13.5)2 times (1,728 cubic inches per cubic foot) / (231 cubic inches per gallon) = 17,132 gallons (rounded) Also, 2290 cubic feet (rounded), or 84.8 cubic yards (rounded).