Best Answer

Micrometer and Vernier

Q: What two instruments would you use to measure the diameter and thickness of a material?

Write your answer...

Submit

Still have questions?

Continue Learning about Geometry

Measure its diameter.

nini lmao

You measure it. If you know the radius (of a circle), you multiply it by 2 to get the diameter. If you know the circumference of a circle, you divide by pi to get the diameter.You measure it. If you know the radius (of a circle), you multiply it by 2 to get the diameter. If you know the circumference of a circle, you divide by pi to get the diameter.You measure it. If you know the radius (of a circle), you multiply it by 2 to get the diameter. If you know the circumference of a circle, you divide by pi to get the diameter.You measure it. If you know the radius (of a circle), you multiply it by 2 to get the diameter. If you know the circumference of a circle, you divide by pi to get the diameter.

A diameter is measured by using a ruler. However, you also could use a digital caliper to measure the diameter of a circle.

to divide a pipe into sections measure the outside diameter then multiply by 3.142 this will give you the circumference divide this number by how many sections you require place a mark anywhere on the on the pipe then measure from that mark your answer The best method for calculating the cross section area of a round pipe or tube is to use the following formula: ((D-W)*W)*PI Where as D= Outside Diameter Measurement W= Wall Thickness PI= 3.1416 that is circumference. The answer I have is: diameter squared x .7854 Ex. 3inch pipe (inside diameter) 3 x 3 x .7854= 7.0686

Related questions

Reinforcing pads mirror the pipe that they are being welded to in size, thickness, and material. To measure the diameter of the pad, measure the pipe at a cross section.

It is not possible to answer this without more information. However to find the thickness measure the external diameter, measure the internal diameter subtract the internal from the external and that will give you the thickness of the pipe

A pachymeter is any of a group of instruments which are used to measure the thickness of something.

proposenately

Calipers, of which there are many types, are used to measure thickness. The most common type is the Vernier Caliper.

Measure external diameter. (A) Measure internal diameter. (B) Subtract B from A

To measure the thickness of a thin piece of wire we have got the instrument called the wire gauge. The thickness of a thin piece of wire is measured in mm.

You measure it. Any millimeter graded ruler or measuring tape or yardstick would tell you the diameter, but the thickness is most easily and accurately measured with a vernier caliper.

A pachometer is another term for a pachymeter - any of several instruments which are used to measure the thickness of something.

To measure the concrete needed for a circular pad:-- Decide how thick (deep) the pad is to be. If it's in inches, divide by 12 for thickness in feet.-- Measure either the circumference or the diameter of the circle, in feet.-- If you measured the circumference, then the cubic yds of concrete needed is(0.00295) x (circumference) x (circumference, again) x (thickness) ... all in feet-- If you measured the diameter, then the cubic yds of concrete needed is(0.0291) x (diameter) x (diameter, again) x (thickness) ... all in feet

That depends what you want to measure: its diameter, thickness, volume, mass, resistance against pressure, etc.

Radius or diameter in inches or cm. thickness in thousandths or hundredths of an inchor mm.