Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
height * width * depth = volume height = volume / (depth * width) Volume = lengthXwidthXheight V=LWH H=V/LW
depth equals volume divided by length times width
Depth Girth, width
They are 2 dimensional shapes that only have length and width.
Ruler
500 acres is 21,780,000 square feet. Assuming dthe depth is greater than the width, the depth can be any number greater than sqrt(21780000) = 4666.91 ft. Suppose the depth is D feet then a rectangular area with width = 21780000/D will have an area of 21780000 sq ft or 500 acres.
Measure the depth and width using the same units. Divide the depth measurement by the width measurement.
width, depth and height
A trench is a narrow excavation where the depth is greater than the width and the width does not exceed 15 feet. It is commonly used for construction purposes such as laying pipes, cables, or tunneling work. Trenches must be supported and shored to prevent collapse and ensure worker safety.
The depth is neither the length nor width. Length is the measurement from top to bottom, width is from side to side, and depth is from front to back.
The width and depth of a river are related because they both contribute to the overall discharge or flow of water in the river. A river with a greater width and depth is likely to have a larger volume of water flowing through it compared to a narrower and shallower river. This relationship is important for understanding the capacity and behavior of a river system.
height * width * depth = volume height = volume / (depth * width) Volume = lengthXwidthXheight V=LWH H=V/LW
depth equals volume divided by length times width
width
No, they do not.
A point.
Area is a plane or surface measurement. Depth is not required. Multiply the length by the width.