16 is probably wire guage.
A cross. A Fence. Wire Mesh.
No. of openings per square inch of wire mesh is specifies the mesh size and its again depends on wire dia also. If the number of openings per square inch is more then partical size which it can pass through the filter will be less. For example for 325 mesh size, where in 44 micron size of particle can get filter. In 200 mesh size 74 micron size of particle will get filter.
Ring, Star, Bus, Mesh.
By the diameter of the wire.
Steel wire mesh is welded by spot welding which could be continuous or staggered, depending on the application and strength of joints required. Sometimes, they are fastened by screws to the frame which serves as retainer also.
That would depend on the wire thickness, and size of mesh.
IT helps strengthen the concrete and prevent cracking But please note usually the "welded wire mesh" used in concrete is named reinforcing mesh, its wire is ribbed. And the wire of welded wire mesh in industry usually is plain, it used for fence panel, floor heating system and so on. The following are reinforcing mesh and welded wire mesh link. dingzhenfence.com/product/Welded_Wire_Mesh.html dingzhenfence.com/product/Welded%20Wire%20Mesh
Fiber mesh is the best way to go in my opinion! You save the cost of wire mesh , and installtion! And works better than wire.
There are several places to buy wire mesh depending on it's intended usage. DIY stores like B&Q and Wickes stock wire mesh for building and garden requirements. Amazon and eBay have that too, as well as mesh for kitchen and craft purposes.
You just fine collanders with fine pastas like angel hair.Large mesh collanders are better for straining lettuce and similar things because they drain faster.
16 is probably wire guage.
W9xW9 welded wire mesh consists of lengths of steel wire welded into 9 inch by 9 inch squares. This material is used to reinforce concrete panels and floors.
A wire gauze is a mesh made from wire, and is basically used as a filter or s sieve.
BRC is a wire mesh which the diameter of the wire is 10mm and the holes size are 200mmx200mm.
Microwaves cannot diffract through the holes in a wire mesh because the wavelength of microwave radiation is larger than the size of the holes in the mesh. Diffraction occurs when waves encounter an obstacle or aperture that is comparable in size to their wavelength. Since the holes in the wire mesh are much smaller than the wavelength of microwaves, diffraction does not occur.