Just use 1mL
36% of the way to the 1ml line.
How full should a 1ml oral syringe be to have 2.5mg in it??
0.125 ml on a 1ml syringe is generally located at the first division line after 0.1 ml mark. If the syringe is not labeled with specific measurements at that level, estimating between the 0.1 ml and 0.2 ml marks can help you measure 0.125 ml accurately.
1cc = 1ml. So on the syringe marked in ccs, it should be 1cc.
CC stands for cubic centimeters. ML stands for Milliliters. One cc is equal to one ml. So, if you need 1ml you can use 1cc or 1/5 of a 5cc syringe.
To draw up 0.18 ml in a 1 ml syringe, you would pull the plunger to the 0.18 ml marking on the syringe barrel while making sure there are no air bubbles. Make sure to read the measurement at eye level for accuracy. If the syringe does not have a 0.18 ml marking, estimate between the closest incremental markings.
There is no difference. 1 cubic centimeter (cc) and 1 milliliter (mL) are the same volume.
In a 2.5ml/2ml syringe measurement is given in 0.1ml intervals.So for 0.75ml you have to take in between the 0.7 and 0.8ml mark.0,5ml,1ml.1.5ml are marked by large lines and 0.ml intervals by small lines.
Normally when working with injection medications, always go with the smallest syringe. If asked to withdraw 0.3 mL then use a 1mL syringe. If that isn't doable, then use the 3mL syringe. If asked to draw 4mL, use the 5 and so on. As far as a vein graft however, I believe a 3mL syringe will create higher peak pressure and velocity than that of a 10 or 20 mL syringe.
The cubic centimeter and the milliliter are equivalent units. 1 cc = 1 mL.
1 ml = 1 cc this applies to all metric mesurements reguardles of profession.