To fix a toilet that runs for 5 seconds and then stops, you can try adjusting the water level in the tank by adjusting the float or flapper. If that doesn't work, you may need to replace the flapper or the fill valve.
To adjust the toilet float and fix a running toilet, locate the float adjustment screw on the fill valve. Turn the screw clockwise to lower the water level and counterclockwise to raise it. Experiment with small adjustments until the water stops running.
delete browser history will fix your prob
It's not the toilet, there's a blockage in the pipes some where after the drain pipe from the toilet joins up with the drain pipe from the tub.You're going to need to have the pipe snaked.
A toilet runs constantly when there is a leak in the tank or the flapper is not sealing properly. To fix it, you can adjust the flapper chain, replace the flapper, or check for any leaks in the tank and repair them.
Yes, it is necessary to fix a toilet flange that is not level to ensure proper installation and prevent leaks or other issues with the toilet.
To fix a rocking toilet, you can try tightening the bolts at the base of the toilet using a wrench. If that doesn't work, you may need to replace the wax ring or use shims to stabilize the toilet.
That depends on what is wrong with it.
To fix a toilet seal, you will need to remove the toilet, replace the wax ring seal, and then re-install the toilet. Make sure to clean the area thoroughly before re-installing the toilet to ensure a proper seal.
Get a new toilet
To fix a toilet leaking at the base, you can try tightening the bolts at the base of the toilet, replacing the wax ring seal, or contacting a plumber for professional assistance.
To adjust the toilet float to fix a running toilet, locate the float mechanism in the toilet tank and adjust the float arm or screw to lower the water level. This will help stop the water from continuously running.
To fix a leaking toilet seal, you will need to replace the wax ring that seals the connection between the toilet and the floor. This involves removing the toilet, cleaning the area, and installing a new wax ring before reattaching the toilet.