0
Add your answer:
Earn +20 pts
What type of wire should be used for an RV that requires a 30 amp power supply?
For an RV that requires a 30 amp power supply, a 10-gauge wire should be used to safely handle the electrical load.
Where should ac or DC supply be used?
The type of power supply being used (AC or DC) should match the power requirements of the device it will be supplying power to.
What type of power supply does the Sony GVD200 Portable VCR require?
The Sony GVD200 Portable VCR requires a 3.5 watt external power adapter.
What is the first step you should take when testing a power supply?
You first have to know the type of power supply your are testing. Then you could test whether the power supply is receiving anything from its source. Next check if it is giving any output.
What type of waveform is produced by Ferroresonant power supply?
ferro-resonant power supply?
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?berg mini-molexmolex.20-pin ATX connector
What type of power supply is needed to power the Mitsubishi LT-70 turntable?
The Mitsubishi LT-70 turntable requires a standard AC power supply rated at 110-120V and 60Hz. It is important to ensure that the power supply meets these specifications to avoid damaging the equipment.
What type of plug is required for a single phase 220 volt power supply?
A single phase 220 volt power supply typically requires a plug with three prongs, including two hot prongs and one ground prong. The specific type of plug needed may vary depending on the country or region.
What type of cord is required for a 3 prong oven?
A 3 prong oven requires a 240-volt electrical cord with three prongs to safely connect to the power supply.
How do I decide what type of power supply I need when I'm building a desktop PC?
Power supply is dictated by your motherboard, simply get the power supply which matches the motherboards pin configuration.
What are the features of power supply?
what the characteristic of power supply? Ans: The electronic part of the Audine camera requires a +/-15V symmetrical power supply. Consumption is 30 mA for the positive voltage and 10 mA for the negative voltage. If possible, the peak-to-peak ripple must be lower than 5 mV. To reduce the electronic noise level, it is recommended to choose a linear type power supply instead of a switching power supply since the aim is to control sensitive electronic circuits such as the ones in a CCD camera. The required power supply can be easily built using 7815-type voltage regulators (for the positive voltage) and 7915 regulators for the negative voltage as well as a transformer, a few capacitors and rectifier diodes.
What type of light bulb should I use for my fixture that requires a G type bulb?
You should use a G type light bulb for your fixture that requires it.
