use decent two-stroke oil at 50 to 1. don't ever buy oil from a gas station without sealed container; who knows what the oil really is.
A motorbike mechanic once told me "if in doubt, run a two stroke at 40:1" it may be prone to fouling a plug a little more often, however a spark plug is far easier to replace than a piston and ring set!
Ah, what a lovely question! The standard form of 250 is simply 250. It's like a happy little number just waiting to be painted on the canvas of mathematics. Just remember, you can always add more numbers to the mix to create something truly wonderful!
Mix ratio refers to the proportion of different components or ingredients that are combined to create a mixture. It specifies the ratio or proportion by weight, volume, or some other unit of measurement. For example, a mix ratio of 2:1 means that there are two parts of one component and one part of another component in the mixture.
1.21 as a mix number
MIX means 1009.
No, never mix tire sizes.
32:1
recomand mix 1/30 denicol racing 2t oil
it depends really i have the same bike and i do 40:1 ratio that's 16oz to every 5gal of gas
The 250 uses straight gasoline.
50:1 ratio
50:1
20:1
There is no fuel mix needed they are 4 stroke air cooled. Just use straight gas. dbg
VERY likely your fuel mix is too lean. Adjust the air/fuel mix settings and it should fix it.
Ratios32:1 GAS/OIL MIXTURE4 ounces of oil per gallon of gas.
2% fullsuntetic oil
for my 1982 Cr125 the gas mixture is 40:1... not positive if its the same for a 250... but my suzuki 1991 suzuki 250 is also 40:1 so its most likely 40:1...