0
Probably 19 gauge, which is 1.067 mm
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How many gauge in mm?
For wire gauge, 1.25 mm diameter wire is closest to 16 gauge (AWG). See related link.
What is 24 gauge equals mm?
.635 mm
How thick is 26 gauge steel in mm?
For a wire classified under American Wire Gauge standards, 26 gauge wire is 0.0159" (0.40386 mm) in dameter. For a wire classified undere metric wire gauge standards, a 26 gauge wire is 2.6mm in diameter. Metric gauges are calculated simply by multiplying the diameter, in mm, by 10 and therefore increase as the diameter increases, unlike the AWG standard.
If the wire dia is 4mm then what is the gauge?
A wire with a diameter of 4mm corresponds to a wire gauge of approximately 6 AWG (American Wire Gauge). The relationship between wire diameter and gauge is not linear, so different wire diameters can correspond to the same gauge.
What is a 1.5 mm in gauge?
In gauge measurements, 1.5 mm is approximately 16 gauge. Keep in mind that gauge measurements can vary slightly depending on the specific material or standard being used.
What is the gauge number of the wire with a diameter of 2.0 mm?
AWG # 12 is 2.053 mm in diameter.
How many meshes are there in square meter of wire gauge each mesh being 20 mm?
20 million
What is the relation between gauge and mm in the wires or sheets?
In the context of wire or sheet metal, gauge refers to the thickness of the material. The higher the gauge number, the thinner the material. The relationship between gauge and mm varies depending on the standard being used, as different countries have different gauge systems. For example, in the American Wire Gauge (AWG) system, a lower gauge number corresponds to a thicker wire, while in the Standard Wire Gauge (SWG) system, higher gauges correspond to thicker wires.
What you using wire gauge in mm on 1kilowatt?
Wire gauge is determined by the capacity in amps. At 120 volts it requires 8.33 amps to provide 1000 watts. The typical residential application would require 18 AWG wire 1.024 mm in diameter.
How big is 23 gauge?
Standard 23 gauge wire is (0.0226 inches/0.57404 mm) thick in diameter.
What is 16 gauge steel in mm thickness?
1.5189mm I think this answer have some deviation of the right one, gauge 16 equals 1.59 mm
How many meters equals a mm?
1000 mm equals one meter
