1 rod2 = 272.25 square feet.
A rod is an old English unit of measure that equals 16.5 feet or 5.0292metres minecraft
1 rod = 16.5 feet
A rod is equal to 16.5 feet, 5280 feet = one mile, so 320 rods = one mile.
16.5 feet
1 rod is 16.5 feet (16 feet 6 inches).
1 square rod = 272.25 square feet.
15.757575757575758 feet
I assume you are refering to roofing material, since a "square" in the roofing industry is equivalent to 100 square feet of material. 1 linear meter equals 3.28084 feet 1 square meter equals (3.28084 ft)2 or 10.7639 square feet Therefore, 80 square meters equals 80 x 10.7639 square feet or 809.93 square feet Since a roofing "square"=100 sqft, 80 square meters equals 8.0993 "squares" If you don't want to carry a calculator around in the field, just remember that: 1 square meter is a bit under 11 square feet. and that 1 square of roofing will cover almost 10 square meters (but not quite) Rod Burrows, PE
Assuming a square acre, each side would be approximately 208.7 feet, so the 4 sides would equal approximately 835 feet. A rod is 16.5 feet, so 835 divided by 16.5 equals approximately 50.6 rods.
A rod is an old English unit of measure that equals 16.5 feet or 5.0292metres minecraft
1 rod = 16.5 feet
The marla was standardized under British rule to be equal to the square rod, or 272.25 square feet, 30.25 square yards, or 25.2929 square meters.
1 square rod = 30.25 square yards.
There are 43,560 square feet in an acre and a perch is equal to one square rod, which is 272.25 square feet. Therefore, there are approximately 160 perches in an acre of land.
A rod is equal to 16.5 feet, 5280 feet = one mile, so 320 rods = one mile.
A squarerod is not a length measurement, so it's not possible to convert from that to feet.I suspect you meant to say "square rod", but that's still not a length measurement (it's an area measurement), so the same problem applies. A square rod is 272.25 square feet, if that helps.
16.5 feet