15/64 drill bits are the best substitution for 6mm drill bits.
ANS 2 -Now think a little here, - is someone who doesn't have a 6 mm drillbit likely to have a fairly rare one like 15/64. - 1/4 is a reasonable substitute.
6mm
6 millimeters=0.23 inches Direct Conversion Formula 6 mm* 1 in 25.4 mm = 0.2362204724 in
0.2362204724 in Direct Conversion Formula 6 mm* 1 in 25.4 mm = 0.2362204724 in
The volume of a right circular cone with a radius of 4mm and a height of 6mm equals 140.88mm3
There are ten millimeters to a centimeter. 6 cm = 60 mm
6mm
6 millimeters = 0.236220472 inches Direct Conversion Formula 6 mm* 1 in 25.4 mm = 0.2362204724 in
4mm-6mm in inches = -2
Well there are 4 6mm beads in an 1", so there would be 64 6mm beads in 16".
I use 6mm for 6mm, but if you don't have a metric set, 1/4 inch is only very slightly bigger.
Surprisingly enough- a 6 mm drill bit, or if you don't have one,1/4 drill bit will do.
drill it out 6mm drill to 13mm drill but do not go deeper than 13 mm.
6 millimeters = 0.236220472 inches
the answer is 6mm by jay jay
6 millimeters=0.23 inches Direct Conversion Formula 6 mm* 1 in 25.4 mm = 0.2362204724 in
Multiply millimeters by 0.03937 to get inches. So, 6mm = 6 x 0.03937 = 0.23622 inch (just under 1/4 inch).
0.2362204724 in Direct Conversion Formula 6 mm* 1 in 25.4 mm = 0.2362204724 in