Q: 750.5 kgm3 to API Gravity 60 Deg F?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

110 deg C = 230 deg F.110 deg C = 230 deg F.110 deg C = 230 deg F.110 deg C = 230 deg F.

250 deg C = 482 deg F.250 deg C = 482 deg F.250 deg C = 482 deg F.250 deg C = 482 deg F.

10 - deg 20 - dau deg 30 - tri deg 40 - pedwar deg 50 - pump deg 60 - chewch deg 70 - saith deg 80 - wyth deg 90 - naw deg 100 - cant

-47 deg F = -43.88... deg Celsius (not celcius).

126 deg F = 52.2 deg Celsius.

Related questions

As per API 6A temperature classification, -20 deg F to 250 deg F operating temperature range.

The weight of a barrel of oil will depend on its density. A barrel contains 42 gallons and density is typically measured in units of API gravity. Units can be a bit confusing in this case. We need to convert from API density to pounds per gallon. Crude oil can typically vary from 15 to 45 deg API although I have worked with oils as low as 8 and as high as 50. Let us consider oil gravity of 30 deg API, as all other densities are calculated in the same way. Specific Gravity = 141.5/(131.5 + 30) = 0.876 The specific gravity is the density of the oil relative to water. Now, to convert this to pounds per gallon, we must multiply the answer by 8.34 (density of water is 8.33 pounds per gallon): 8.34 x 0.876 = 7.30 pounds/gallon. Since there are 42 gallons in a barrel, we must multiply this answer by 42: 42 x 7.30 = 307 pounds. To summarize, a) convert API to specific density b) convert specific density to pounds per gallon and c) multiply gallons in one barrel by the pounds per gallon.

Type API SG or SG/CDVisacosity 10W-30, 10W-40, 10W-50 from 0 deg F to 100+ deg F; 5W-30, 5W-40m below 0 def F but can be used up to 100 deg F

The weight of a barrel of oil will depend on its density. A barrel contains 42 gallons and density is typically measured in units of API gravity. Units can be a bit confusing in this case. We need to convert from API density to pounds per gallon. Crude oil can typically vary from 15 to 45 deg API although I have worked with oils as low as 8 and as high as 50. Let us consider oil gravity of 30 deg API, as all other densities are calculated in the same way. Specific Gravity = 141.5/(131.5 + 30) = 0.876 The specific gravity is the density of the oil relative to water. Now, to convert this to pounds per gallon, we must multiply the answer by 8.34 (density of water is 8.33 pounds per gallon): 8.34 x 0.876 = 7.30 pounds/gallon. Since there are 42 gallons in a barrel, we must multiply this answer by 42: 42 x 7.30 = 307 pounds. To summarize, a) convert API to specific density b) convert specific density to pounds per gallon and c) multiply gallons in one barrel by the pounds per gallon.

68, because it appears more than any other number.

110 deg C = 230 deg F.110 deg C = 230 deg F.110 deg C = 230 deg F.110 deg C = 230 deg F.

250 deg C = 482 deg F.250 deg C = 482 deg F.250 deg C = 482 deg F.250 deg C = 482 deg F.

70.7 deg F = 20.5 deg C70.7 deg F = 20.5 deg C70.7 deg F = 20.5 deg C70.7 deg F = 20.5 deg C

10 - deg 20 - dau deg 30 - tri deg 40 - pedwar deg 50 - pump deg 60 - chewch deg 70 - saith deg 80 - wyth deg 90 - naw deg 100 - cant

The exact answer is needed because flow metering systems uses water at 60 deg f to calculate fluid specific gravity from fluid density. SG= fluid density Lb/f3 / water density lb/f3 at 60 deg f.

60 deg F = 15.5... deg C 70 deg F = 21.1... deg C

-14 deg C = -6.8 deg F