Wiki User
∙ 16y agoThe sine of the angle times the weight of your box is the component of the weight along the plane's surface.
The cosine of 20 times 215 will give you the component perpendicular the plane. (also called the normal force)
Think of this to help you remember.
If the angle were tiny, like 3 degrees, then almost all the weight would be against (perpendicular to) the plane, and almost none would be making it slide down (parallel to the surface) The cosine of 3 degrees is almost 1 (as large as it can be. cos of zero is one, that is it's maximum value). Sin of 3 is almost zero.
Wiki User
∙ 16y agoAn example of an inclined plane is a ramp, slanted road, or a slide. An inclined plane is a surface that is at an angle against a horizontal surface.
Any flat surface that is not coplanar with the horizontal plane.
It is simply a plane surface making an angle with the horizontal (ground).
An inclined plane is a plain surface set at an angle other than a right angle against a horizontal surface
The inclined plane is a plane surface set at an angle, other than a right angle, against a horizontal surface. The inclined plane permits one to overcome a large resistance by applying a relatively small force through a longer distance than the load is to be raised.
Velocity (not verlocity) parallel to the earth's (not earht's) surface is called the horizontal component of the velocity.
An inclined plane is any surface with an upward slope away from a horizontal line. A wedge fits this description, however it could also be classified differently as having a declining slope from a parallel horizontal surface.
An inclined plane is any surface with an upward slope away from a horizontal line. A wedge fits this description, however it could also be classified differently as having a declining slope from a parallel horizontal surface.
No. A flat surface which is horizontal is not an inclined plane.
An example of an inclined plane is a ramp, slanted road, or a slide. An inclined plane is a surface that is at an angle against a horizontal surface.
To calculate work on an inclined plane, you would need to consider the component of the force acting parallel to the surface of the incline. The work done is calculated by multiplying this force component by the distance over which it acts. The formula for work on an inclined plane is Work = Force (parallel to the incline) x Distance x cos(theta), where theta is the angle of the incline.
A horizontal surface is level and parallel to the ground, while an angled surface slopes or tilts in relation to a horizontal plane. Horizontal surfaces are typically used for stability and flatness, while angled surfaces may be inclined for specific purposes such as drainage or aesthetics.
horizontal.
No, you don't perform CPR on an inclined surface. It must be horizontal, flat, and hard (not deflect while giving compressions).
Any flat surface that is not coplanar with the horizontal plane.
Yes, in an inclined plane, the force has both a component parallel to the incline (the gravitational force) and a component perpendicular to the incline (the normal force). The normal force always acts perpendicular to the surface, while the gravitational force acts parallel to the incline.
because it has a smooth slanted surface that is horizontal.