0
A carpenter is cutting wood strips to make picture frames each frame is 8 in by 10 in how many frames can he cut from a piece of wood that is 8 feet long?
There is really no straight way to answer this without enough information on the dimensions of the wood. If I knew the width of the board that the strips were being cut from, and the type of wood joint to be used i could give a better answer, so I will roughly go over the multiple answers. Lets say the board is 1 inch thick, 2 inches wide, and 8 feet long, and you are going to use butt joints on the frame, the ten inch side of the frame could be made of 6 inch longstrips, because of the width of the 8 inch strips or the other way around. You could make 3 frames with this method, with 12 inches left over.
Using the same dimension board, but using a miter joint. You measure your outside edge of the board to the finish dimension, 8x10. You will have longer strips on either side than with butt joints, but you can flip the board after each 45 degree cut to reduce waste, by about two inches for every two strips cut. You can still make 3 frames, but with no waste save for a 2 inch triangle from each end of the board.
If it were a thicker board, and ripped down the middle, or by 3, you can do even more. The possibilities are endless, and I have had a lot of fun with this question.
What else can I help you with?
How many one third strips are equivalent to four one sixth strips?
Two one-third strips are equivalent to four one-sixths strips.
What fraction strips can you make if you start with a fourth strips?
You can make eights or sixteenths.
How many 1 6th strips are equivalent to eight 1 3rd strips?
16
How many one sixths strips are equivalent to eight one third strips?
4/1
Which of the fraction strips you folded have at least one mark that lines up with the mark on the twelfths strips?
sixths
How to make magnetic picture frames?
If you already have the picture frame, you can obtain some magnetic strips and glue them on; if you cover enough of the frame, it should stick to magnetic surfaces.
What are the best ways to hang acrylic photo frames for wall display?
The best ways to hang acrylic photo frames for wall display are to use adhesive strips, screws with anchors, or picture hanging hooks. Make sure to measure and mark the placement of the frames before hanging them to ensure they are level and evenly spaced.
What is clear cutting strip cutting and selective cutting?
Clear cutting involves removing all trees from a selected area. Strip cutting involves removing trees in narrow strips, leaving other strips intact to assist with regeneration. Selective cutting involves choosing specific trees for harvesting while leaving others to maintain the overall forest structure and biodiversity.
What has the author Randy Carpenter written?
Randy Carpenter has written: 'New adventures of Stupid Boy' -- subject(s): Superhero comics, Comic books, strips
How can I efficiently cut a pepper into strips?
To efficiently cut a pepper into strips, start by cutting off the top and bottom of the pepper. Then, slice the pepper in half and remove the seeds and membrane. Next, lay the pepper halves flat on the cutting board and slice them into strips of your desired thickness.
How does the grass on a baseball field look like a checkerboard?
That has to do with the direction the grass is cut. By cutting strips of grass in different directions it can be made to look like dark strips are next to light strips.
Cutting a piece of paper in to strips is a physical change what kind?
cutting a paper is a irreversiable physical change in other words non recurable change.
What are the best types of frame holders for wall to securely display artwork or photographs?
The best types of frame holders for securely displaying artwork or photographs on a wall are picture hooks, wall anchors, and adhesive strips. These options provide stability and support for various sizes and weights of frames.
How do you use the razor blade on back lot island?
Slide it across along the green lines to cut the unwanted frames from the film strips.
How do you dice a tomato effectively?
To dice a tomato effectively, start by cutting off the top and bottom of the tomato. Then, slice it in half horizontally and remove the seeds. Next, place the flat side of the tomato on the cutting board and slice it into strips. Finally, turn the strips and dice them into small cubes.
How to cut a bell pepper into strips effectively?
To cut a bell pepper into strips effectively, start by cutting off the top and bottom of the pepper. Then, carefully slice the pepper in half and remove the seeds and membrane. Next, lay each half flat on the cutting board and slice them into strips of your desired thickness. Make sure to use a sharp knife and steady hand for best results.
How do you get your comic strips noticed?
you bring it to the building that has a lot of big nate picture and give it to the author
