The relationship between resistivity and circumference is inverse.The resistance of a substance decreases as the surface area of that substance increases. The greater circumference presents a greater conduction surface.AnswerThe original answer describes resistance, NOT resistivity. Additionally, it is incorrect because resistance is inversely-proportional to cross-sectional area NOT circumference!There is NO relationship between resistivity and the circumference of a material. Resisitivity is a constant at any given temperature and is completely unaffected by the dimensions of a material.
None. A hole is the absence of the material.
well it depends. The material coins are made of is different. Nickel or copper. Therefore pounds. OR The circumference. Diameter X Pi.(3.141...).
To make a cone net with a radius of 3 cm and a height of 10 cm, first calculate the slant height using the Pythagorean theorem: (l = \sqrt{r^2 + h^2} = \sqrt{3^2 + 10^2} = \sqrt{109} \approx 10.44) cm. The net consists of a circular base with a radius of 3 cm and a sector (triangle) with a radius equal to the slant height. The area of the sector can be determined by calculating the circumference of the base (2πr) to find the angle needed for the sector, which is then drawn on paper or a suitable material for cutting out the net. Finally, cut out the circular base and the sector, then assemble them to form the cone.
A sphere is the shape that holds maximum volume for minimum amount of material for the container - glass. However, a spherical jar could roll off work surfaces: not very useful. So the best compromise is a flat base but a circular cross-section. That is, a cylinder.
To calculate the area/circumference of a circle when designing something circular with a limited amount of material. i.e. you have to design a bronze circle and only have 27 sq ft of bronze. You have to calculate the circumference to see if you need to make the circle smaller or not.
No, eukaryotes do not possess circular DNA in their genetic material.
Our genetic material is stored in outlet DNA, which is spiral shaped, jot necessarily circular.
Yes, prokaryotes possess circular DNA in their genetic material.
Prokaryotes have their genetic material organized in a circular manner.
Plywood is the recommended subfloor material for installing hardwood flooring.
It is the tangential stress ( normal to the radius) in a circular structure, such as a ring (hoop). For a example if you shrink fit a ring over a cylinder it will have hoop stress, tangential stress along the entire circumference.
The term for the circular movement of material inside Earth's mantle is convection. Heat from Earth's core causes hot material to rise, while cooler material sinks, creating a continuous, circular flow that drives plate tectonics.
The circular motion you are referring to is called convection. When warm material rises and cools, it creates a circular flow as it sinks back down to be reheated. This movement is driven by differences in temperature and density within the material.
The most important consideration when installing playground equipment is the finishing material.
QuestionThe term for the circular movement of material inside earth's mantle is convection current. This current causes the movement of the tectonic plates.
it depends on the material and circumference.