To determine the maximum depth at which a wave will not be refracted, we can use the rule of thumb that the water depth should be at least half the wavelength. If the wavelength is ( \lambda ) meters, the critical depth for minimal refraction would be ( \lambda / 2 ) meters. Therefore, a wave will not be refracted in water with a depth greater than ( \lambda / 2 ) meters.
the height is 241 meters tall but i forget the measurement in feet. that's all i know.
Wave speed = (wavelength) x (frequency) "Depth" (?) is not involved.
The wave base is typically defined as the depth at which the wave's energy significantly diminishes, generally about half the wavelength. For a wave with a wavelength of 10 feet, the wave base would be approximately 5 feet. This means that below this depth, the effects of the surface wave are minimal.
length signifies how long the object is while depth signifies the deepness or height of the object .there is no difference in depth and height of an object
10 meters of water depth equals about 1 atmosphere.
not a shore
It is a deep-water wave because the depth of the water is more than half the wavelength of the wave. In deep-water waves, the water depth is greater than half the wavelength.
The wavelength of a wave is inversely related to the depth of the water. As a wave enters shallower water, its wavelength decreases. This causes the wave to slow down and increase in height, leading to breaking waves near the shore.
A wave typically breaks when its wave base reaches the depth of half its wavelength. Therefore, for a wave with a wavelength of 3 meters, it would break when the water depth is approximately 1.5 meters. The distance from the shore at which this occurs depends on the slope of the seafloor.
A meter is not a refrigerator.My refirgerator has a height of 1.8 meters, a width of 0.8 meters and a depth of 0.6 meters.
measurement from the crest of the wave to the crest of the next wave
A wavelength of 15 feet yields a base of about 7.5 feet. The wave base of a wave (the depth to which it moves water) is about 1/2 the wavelength.
The type of wave that has a wavelength of 3 meters in water with a depth of one meter is a shallow-water wave. Shallow-water waves have wavelengths that are much longer than the water depth, which causes the wave speed to be dependent on the water depth.
Wave breaking typically occurs when the water depth is approximately equal to or less than 1.3 times the wave height. Therefore, a wave with a 5 meters height would likely begin to break in water depths of around 3.85 meters or less.
the height is 241 meters tall but i forget the measurement in feet. that's all i know.
The depth of the wave depends on several factors. For example ocean waves are wind generated waves. With enough force, it can create enough circulation in the water to create a large enough wave. The depth of a wave is essentially determined by how deep the water is combined with the force exerted and distance allowed.
Wave speed = (wavelength) x (frequency) "Depth" (?) is not involved.