It is the same. 1 dot is also 1 pixel.
Ten thousandths of an inch is equal to 0.0001 inches. This measurement is often referred to as one tenth of a mil or 0.1 mil, with one mil being one-thousandth of an inch. In metric terms, ten thousandths of an inch is approximately 0.00254 millimeters. It is a very small thickness, commonly used in precision engineering and manufacturing.
This could vary from how much you set it up. A printer could go from 50dpi-800dpi. (dpi is dots per inch.) For type setters, 72 points equals one inch.
118 dots per square centimeter, which is equivalent to 300 pixels per inch.
About as often as a hairstylist does.
no ,dots are dots and pixels measure how big a picture is.
DPI stands for dots per inch, it is often used to measure the quality of scanners and printers. The higher the DPI, the more dots, can be printed in an inch, and thus the higher the resolution. The same applies in scanners, the higher the DPI, the more dots per inch are uploaded and thus the higher the resolution.Dots per inch, usually missconstrued with ppi which is pixels per inch
its using alots of ink
Refers to the sharpness and clarity of an image. The term is most often used to describe monitors, printers, and bit-mapped graphic images. In the case of dot-matrix and laser printers, the resolution indicates the number of dots per inch. For example, a 300-dpi (dots per inch) printer is one that is capable of printing 300 distinct dots in a line 1 inch long. This means it can print 90,000 dots per square inch. For graphics monitors, the screen resolution signifies the number of dots (pixels) on the entire screen. For example, a 640-by-480 pixel screen is capable of displaying 640 distinct dots on each of 480 lines, or about 300,000 pixels. This translates into different dpi measurements depending on the size of the screen. For example, a 15-inch VGA monitor (640x480) displays about 50 dots per inch.
dots per inch
dots per inch
The full form of DPI is Dots Per Inch, which is a measure of the resolution of a digital image or printed document. It indicates the number of individual dots that can be placed in a line within the span of one inch.
The amount of detail in an image is referred to as its resolution. This is determined by the number of pixels per inch (PPI) or dots per inch (DPI) in the image, which affects the clarity and sharpness of the visual information.
dpi is dots per inch. 400 * 600 dpi is the number of ink dots per square inch that are produced by a computer printer.
"DPI" stands for dots per inch. It measures the resolution of a printed page by counting the number of individual dots that can be placed in one linear inch. The higher the DPI, the finer and more detailed the print quality.
dpi means dots per inch. If you were to print a straight line one inch long using the max print setting (600 dpi for your printer) that line would consist of 600 dots. Fairly high quality image
DPI stands for Dots Per Inch.....