A US quarter is 24.26 mm in diameter, giving it an area on each face of 462.2441 square mm (A = pi * r^2). Is also 1.75 mm thick, meaning that the edge (assuming that it was smooth - that is, without giving effect to the increase area brought about by the 119 reeds on the reeded edge) would have an area of 133.3763 square mm (A = 2 * pi * r * h). Thus, the total surface area of a US quarter would be 1057.8645 square mm. A Canadian quarter is 23.81 mm in diameter, giving it an area on each face of 445.2548 square mm (A = pi * r^2). Is also 1.60 mm thick, meaning that the edge (assuming that it was smooth - that is, without giving effect to the increase area brought about by the reeds on the reeded edge) would have an area of 119.6821 square mm (A = 2 * pi * r * h). Thus, the total surface area of a Canadian quarter would be 1010.1916 square mm.
Chat with our AI personalities
The area of Jewellery Quarter is 1,070,000.0 square meters.
It is: (pi*radius2)/4
The diameter of a quarter is 24.26 mm. Circumference is pi* diameter. 24.26 mm * 3.14159=76.21 mm
If you are talking about a rectangle, you can't find the area from just the perimeter. With a perimeter of say 80 units, the sides could be 10 and 30, with an area of 300 square units. But the sides could also be 5 and 35, with an area of 175 square units. There are lots of other possibilities. If you are talking about a square, that's different. Each side is a quarter of the perimeter, so the area is a quarter of the perimeter multiplied by a quarter of the perimeter.
Area = pi*3/82 = 0.4417864669 or 0.442 correct to three decimal places