Wiki User
โ 12y agoI found out that I was on the T2 screen (time zone 2) which only allows you to change hours......as if you were setting your watch for a different time zone. I pressed the mode button and cycled through the features until I arrived at the time which showed the day of the week. Then I held down the set button and was able to get the clock set.
Wiki User
โ 12y ago3 minutes and 42 seconds.
You divide seconds by 60 to get minutes: 500,000 ÷ 60 = 8,333.33 minutes.
11 minutes and 15 seconds
There are 60 seconds in a minute, so a half minute would be 30 seconds. If you have a length of time in half minutes, multiply that by 30 to get seconds. For example, 20 half minutes = 20 x 30 seconds = 600 seconds
Hold mode button until alarm time appears push mode button one more time until seconds flash on current time click adjust button to switch between minutes and hours click alarm button to change hour or minute. Click mode to exit "set" mode
first you have to change the mode with the mode button. then you chose time, seconds, or minutes with the start button. You change the time with the light button. Good luck.
Hold the lap/reset button for about 3 to 5 seconds and it will then let you change the time. Then press the st/stop button to change the minutes and the mode button to swith to the hour. Hope it helped.
You simply hold the clock button in for a few seconds until the clock blinks ... then you use the radio station back button to change the hours and the radio station front button to change the minutes.
3 minutes and 42 seconds.
You divide seconds by 60 to get minutes: 500,000 ÷ 60 = 8,333.33 minutes.
It is 1 mile in 7 minutes 18 seconds.
Press the mode button to get the time you want to change on the display. The press and hold the reset button until the seconds begin to flash>press the stop/start button to reset the seconds >press mode button to get hours to flash>press the st/stp button to advance the hours > press the reset button to get minutes to flash>advance minutes with st/stp button >press reset button to get date to flash > press st/stp button to advance date >when all time and date are set press mode to return to normal time display
To convert seconds to minutes, divide the number of seconds by 60. 322 seconds รท 60 seconds/minute = 5 minutes and 22 seconds.
Well there are a total of 60 seconds in one minute. For example, 120 seconds would be two minutes.
To change minutes to seconds multiply the number of minutes by 60.
first turn radio off, then hit the SET button then the SEEK buttton for hours and SCAN button for minutes. If your radio does not have a SET button, then press and hold the Down Arrow button for 2 seconds and you should hear a beep. Once it beeps, release the Down Arrow button. Then repress the Down Arrow button again multiple times as needed to change to the correct Hour. To change the minutes, do the same as above but use the UP Arrow button.
Since there are sixty seconds in a minute, you multiply by 60.