80% (To get the percent use this formula 180×100/210)
unless you want to use rest.. 677 divided by 3 is 225 rest. 2
C(x) = $13.75+$0.2(x) C(225) = $13.75+$0.2(225) C(225) = $58.75
There is no such example. If you cannot use an exact fraction then there will not be an exact decimal that you can use instead. And, if you are using an approximate decimal, you could use an approximate fraction instead.
losers
can i use 215/65r17 winter tires on my 2007 uplander that have 225/65r17 tires on them righ now
Yes, you can use a 225/60R17 tire instead of a 215/65R17 tire, but there are a few things to consider. The first number (225 vs. 215) refers to the width of the tire in millimeters, so the 225 tire will be slightly wider. The second number (60 vs. 65) is the aspect ratio, indicating the height of the tire sidewall as a percentage of the width. A 60 aspect ratio means the sidewall is lower than a 65 aspect ratio, which may affect the ride comfort and handling of the vehicle. It's always best to consult with a tire professional or refer to your vehicle's manual to ensure compatibility and safety.
A 265/70R-17 has an aspect ratio or sidewall height, of 7.3" (185.5 mm) and a total diameter of 31.61" (802 mm). A 225/65R17 has a sidewall height of 5.76" (146.25 mm) diameter 28.52" (724.3 mm). Switching TO 265/70 FROM 225/65 your speedometer will read 60 mph at a true speed of 66.5 mph. Understand that the 70 and the 65 in the tire size is the % of width. Now, that information is presented for you to decide if you can swap.
Yes, you can use a 225-45-18 tires instead of 225-50-18 tires.
2010 ford edge
YesYes
yes the only difference is that it will be that it will be just a bit higher than the originals
You couldn't use those on the same wheel(rim) and you'd have to make sure the front wheels had room when fully turned (steering) If 225/65-17 is the manufactures recommended size the answer is absolutely not. This is a 7.2% increase in overall diameter and you should never go over 3%. If you wish to go with a different tire size then go with a 245/60-15 which is an acceptable swap as long as you do not have in clearance issues on the side when the wheel is turned fully to the right/left. My advice is stick with the OEM size.
I have a 2003 Nissan Maxima GLE and the standard tire is a P215/55R17. incase you have a different model you can put your information in here and it will tell you what tires you can use. http://www.goodyear.ca/goodyeartireselectorca/index.jsp Good luck.
Yes , that is suitable.
not without alot of work there is a way however to use 225 internals and a 127/182 block with a 225 head
No, this is an unacceptable swap. You must never go over or under 3% of the original tires diameter. The 65 series tire will be 3.21% larger in overall diameter. This will have an adverse effect on handling, ride, & braking. Your speedometer will also be off 2 mph.