Wiki User
∙ 14y agoIf a cube measures 5 cm on each end then the total volume of the cube would be 125 cubic cm. Assuming that the cube is actually made of the same steel, 125 x 7.8 = 975g
Wiki User
∙ 14y agoSteel is typically 490 lb/cubic foot. There are 1,728 square inches in a cubic foot which means that each cubic inch weighs about .284 pounds (just a bit over a quarter of a pound per square inch).
The British one penny is 20.32 mm in diameter with a thickness of 1.52 mm of bronze (if made between 1971 and 1992) and 1.65 mm copper-plated steel (if minted after 1992).The one penny weighs 3.5625 grams. The two pence is 25.9 mm in diameter and if minted before 1992 has a thickness of 1.85 mm (bronze), and if minted after 1992 has a thickness of 2.03 mm (copper-plated steel) and weighs 7.125 grams. The 5 pence is 18 mm in diameter and has a thickness of 1.7 mm or 1.89 mm and weighs 3.25 grams. The ten pence has a diameter of 24.5 mm with a thickness of either 1.85 mm or 2.05 mm and a weight of 6.5 grams. The twenty pence has a diameter of 21.4 mm and a thickness of 1.7 mm. The twenty pence weighs 5 grams. The 25 pence has a diameter of 38.61 mm, a thickness of 2.89 mm, and weighs 28.28 grams. The 50 pence has a diameter of 27.3 mm, a thickness of 1.78 mm, and weighs 8 grams. The one pound coin has a diameter of 22.5 mm, a thickness of 3.15 mm, and weighs 9.5 grams. The two pound coin has a diameter of 28.4 mm, a thickness of 2.5 mm, and weighs 12 grams. The five pound coin has a diameter of 38.61 mm, a thickness of 2.89 mm, and weighs 28.28 grams.
Since the steel weighs 1 lb (16 ounces) and the lead weighs 15 ounces, the steel is heavier.
what is the weight per cubic inch of W50 steel
TO answer this question, you need to know the density and the volume of the piece of steel. For example, "mild steel" weighs .284 pounds per cubic inch. The volume of a 12 inch x 12 inch x 1 inch piece of steel is 12 * 12 * 1 = 144 cubic inches. .284 pounds/inch^3 * 144 inch^3 = 40.896 pounds. So each of these steel tiles will weigh about 41 pounds.
The weight of steel per cubic millimeter varies depending on the type of steel. On average, the density of steel is around 7.85 grams per cubic centimeter, which is equal to 0.00785 grams per cubic millimeter.
Steel has a Specific Gravity of 7.83. This means that a cubic foot of steel weighs 7.83 times more than a cubic foot of water (which weighs 62.4 pounds)
Steel is more dense than oxygen. The density of steel is about 7.87 grams per cubic centimeter, whereas the density of oxygen is about 0.0013 grams per cubic centimeter.
In engineering measurements, 1 cubic metre of steel weighs 7.85 metric tons that is 7850 kilograms. You can calculate the volume of 1 kilogram of steel from that. This will come to about 0.00013 cubic metre approximately.
The density of steel varies, but if we assume it's 7.9 grams per cubic centimeter, then the weight of a 12" x 12" x 1/4" chunk can be calculated. There are 36 cubic inches in the chunk of steel (multiply the dimensions together), and there are about 16.387064 cubic centimeters in a cubic inch. That means there are about 573.54724 cubic centimeters in 36 cubic inches. At 7.9 grams per cubic centimeter, there are about 4531.023 grams of steel in 36 cubic inches of this alloy of iron. There are about 4531.023 grams or 4.53 kilograms, or about 9.989 (almost 10) pounds of steel in your twelve by twelve by one quarter piece. The answer in English units is 1 square foot of 1 inch steel weighs 40.8 pounds. take length times width in feet times the thickness in inches times 40.8 to find the weight. In answer to your question the weight would be 10.2 lbs. 1' * 1' *.250*40.8
100 grams is a 100 grams no matter what the material, they weigh the same.
The density of C40 steel is approximately 7.85 grams per cubic centimeter.
On average, 1 cubic yard of steel slag weighs around 2,700 to 3,000 pounds, depending on the specific composition and density of the slag.
A fully-loaded school bus typically weighs around 19 tons.
An old 1970's steel soda can typically weighs around 20 grams.
Aluminium is a third of the weight of steel. 1 cubic cm of Aluiminium weighs 2.7grams.
A cubic meter of steel weighs almost 3 times more than a cubic meter of aluminum. Density of steel is 7.85 g/ cm3, aluminum is 2.7 g/ cm3