0.000027m/s or 27 microns per second
.0081/300 = .000027 = 2.7 x 10^-5
To find your running speed, divide the distance by the time taken. If you ran 300 meters in 52 seconds, your speed would be approximately 5.77 meters per second (300 meters ÷ 52 seconds). To convert this to kilometers per hour, multiply by 3.6, resulting in about 20.8 kilometers per hour.
To find the speed, divide the distance by the time taken. In this case, the distance is 200 meters and the time is 5 minutes, which is 300 seconds. The speed is therefore 200 meters divided by 300 seconds, resulting in approximately 0.67 meters per second.
300 meters/60 sec. = 75 meters/X sec. 300X = 4500 X =15 seconds ------------------- no 300/60 = 5 75/25 = 3 ---------------no, again
To divide 0.0081 meters by 300 seconds, we first perform the calculation: ( \frac{0.0081}{300} = 2.7 \times 10^{-5} ) meters per second. The number 0.0081 has two significant figures, and 300 has one significant figure (when treated as a whole number without a decimal). Thus, the final answer should be expressed with one significant figure: ( 3 \times 10^{-5} ) m/s.
.0081/300 = .000027 = 2.7 x 10^-5
To find your running speed, divide the distance by the time taken. If you ran 300 meters in 52 seconds, your speed would be approximately 5.77 meters per second (300 meters ÷ 52 seconds). To convert this to kilometers per hour, multiply by 3.6, resulting in about 20.8 kilometers per hour.
To find the speed, divide the distance by the time taken. In this case, the distance is 200 meters and the time is 5 minutes, which is 300 seconds. The speed is therefore 200 meters divided by 300 seconds, resulting in approximately 0.67 meters per second.
300 meters/60 sec. = 75 meters/X sec. 300X = 4500 X =15 seconds ------------------- no 300/60 = 5 75/25 = 3 ---------------no, again
To convert 300 meters to miles, you can use the conversion factor that 1 mile is approximately 1,609.34 meters. Therefore, 300 meters is about 0.1864 miles when you divide 300 by 1,609.34.
To convert millimeters to meters, you divide the number of millimeters by 1,000. Therefore, 300 millimeters is equal to 0.3 meters.
To divide 0.0081 meters by 300 seconds, we first perform the calculation: ( \frac{0.0081}{300} = 2.7 \times 10^{-5} ) meters per second. The number 0.0081 has two significant figures, and 300 has one significant figure (when treated as a whole number without a decimal). Thus, the final answer should be expressed with one significant figure: ( 3 \times 10^{-5} ) m/s.
Since there are 3600 seconds in one hour, 12 seconds is 1/300 hour.To travel 18 meters in 12 seconds is the same average speed as traveling 5400 (300 x 18) meters in 1 hour, or 54 km per hour.
To calculate the time it takes to travel 300 meters at a speed of 10 meters per second, you can use the formula: time = distance/speed. Plugging in the values, time = 300 meters / 10 meters per second, which equals 30 seconds. Therefore, it would take 30 seconds to travel 300 meters at that speed.
30 seconds
Divide by 100:30,000 centimeters (cm) = 300 meters (m)
1 minute = 60 seconds. Therefore:To convert minutes to seconds, multiply by 60.To convert seconds to minutes, divide by 60.