The term hydraulic multiplication is usually applied in fire fighting to indicate that water pressure is increased by the use of multiple "stages" to jack up pressure and delivery rates. Let's look at an example. An engine company arrives at a structure fire and the engine commander knows that fighting this with water in the tank will not be a good tactic. He orders a reverse lay (2 x 2 1/2" lines, or perhaps a 4" supply line, depending), and the engine is then set up at the hydrant to act as a manifold. The engineer connects the pump suction to the hydrant. There is pressure in the mains that feed the hydrant, but the pump in the engine will take that pressure and step it up to pump water through the two lines to the "scene" of the fire. The second-in engine sets up at the end of those two lines, and connects one to the suction of itspump. Let's review what is happening as regards the hydraulic multiplication. Pressure in the mains (at the hydrant) is multiplied by the first-in engine and delivered to the second-in engine. The second-in engine multiplies that to deliver water to large (almost certainly 2 1/2") handlines on the fire ground. Any appliance on that second engine is also employed to direct a stream. If a truck arrives (which it should, eventually), it can hook up to the second-in engine, and that engine will then pump to the suction of the truck's pump. That's hydrant outlet to an engine, to another engine, and on to the truck. The truck will deploy its high reach nozzle(s) to get more wet stuff on the red stuff. It's easy to see that the hydrant can only be tapped for so much flow, but the hydraulic multiplication of the three pieces of apparatus here is a no brainer. If water needs to be moved up a long, steep hill, like perhaps in San Francisco, it might not be unusual for several engines to pump that water up the hill. And there might even be a fire boat at the bottom as the first link in the chain. The San Francisco Bay is a virtually unlimited water source!
Adara is Fire in Hebrew Candace means "fire white, pure" in Greek Edna means fire and is Irish Enya is Irish for "little fire"
No, it is not. The word fires is a plural noun or a verb form meaning shoots or burns.
The triangle of fire is a graphical representation of the three elements needed for a fire: heat, fuel, and oxygen.See the related links, below,for an illustrated explanation of the fire triangle.The fire triangle is made up of oxygen, fuel and heat.
It means fire freely, or fire at will.
it holds streamline darts not suction darts the suction darts dont fit in the drum magazine it can also hold micro darts and whistler darts
any kind like Velcro suction streamline and more
No. As the longstrike is a clip system gun, non-streamline darts will cause jams.
The Nerf Mavrick fires all of the darts apart from Glow in the Dark so that is The Whistler Darts, Dart Tag Darts, Clip System Darts, Streamline Darts and Suction Darts.
the firefly uses special glow in the dark micro darts, but can fire sonic micro darts, streamline micro darts, regular suction micro darts, and any other micro darts you can get
No, unfortunately being a clip system blaster the Longshot CS-6 can only fire Streamline Darts.
yes, they accualy work alot better than alot of Nerf darts
No stupid
20 ! hi
streamline darts
There is no place on the BBB's firing mechanism for small darts to be fired.
The Barricade RV-10 comes with 10 Whistler Darts, but can also fire Sonic Micro Darts. I'm pretty sure it also fires Micro Darts and Glow Darts, but not Streamline Darts.