0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you work out the gradiant on a ramp?
Divide the height of the ramp by the length of the ramp (rise over run).
The height of the ramp at its tallest part is 40 inches and the horizontal length is 81 inches. Calculate the distance to the nearest whole inch you traveled down the ramp?
c^2 = a^2 + b^2 c = sqrt(a^2 + b^2) = sqrt(40^2 + 81^2) = sqrt(8161) = 90 inches
Vertical height of the ramp will be 10 feet horizontal base of the ramp will be 15 feet what is the length of the downward sloping side of the ramp?
a2 +b2=c2102 + 152 =c2c=18.03 feet
What does a 10 percent ramp look like?
it is a relatively shallow ramp. every single unit that it gains in height, it makes an equivalent TEN units in length
What is the mechanical adventage of a ramp that is 20 feet and 2 feet above ground?
The theoretical mechanical advantage is the length of the ramp divided by its height. 20/2=10.
You are an avid skateboarder and just skated down a ramp You want to find the distance you traveled The height of the ramp at its tallest part is 40 inches and the horizontal length is 81 inches Ca?
You are an avid skateboarder and just skated down a ramp. You want to find the distance you traveled. The height of the ramp at its tallest part is 40 inches and the horizontal length is 81 inches. Calculate the distance, to the nearest whole inch, you traveled down the ramp.
how do you determine the gradient of a ramp?
To determine the gradient of a ramp, you can use the formula: Gradient = vertical rise / horizontal run. Measure the height of the ramp (vertical rise) and the distance along the slope (horizontal run), then calculate the gradient by dividing the height by the distance. The gradient represents the steepness of the ramp.
What describes how the IMA of this ramp compares with the IMA of the ramp that has a height of 1m?
The ideal mechanical advantage (IMA) of a ramp is calculated as length divided by height. Therefore, the IMA of a ramp with greater height will be smaller than the IMA of a ramp with a height of 1m. This means that a taller ramp will require less effort but over a longer distance to overcome gravitational force compared to a ramp with a height of 1m.
The distance from the ground to the floor of a trailer is 20 inches. The length of the ramp is 50 inches. What is the mechanical advantage of this simple machine?
The mechanical advantage of a ramp can be calculated as the ratio of the length of the ramp to the vertical height it spans. In this case, the mechanical advantage is 50 inches (length of the ramp) divided by 20 inches (vertical height), which equals 2.5. So, the mechanical advantage of this ramp is 2.5.
How would the input force needed to push a wheelchair up a ramp change if you increase the height of the ramp but not its length?
The input force would increase as the height of the ramp increased. It wouldn't matter the distance. Ask me another one.
How would the input force needed to push a wheelchair up a ramp change if you increased the height of the ramp but not it's length?
The input force would increase as the height of the ramp increased. It wouldn't matter the distance. Ask me another one.
How do you work out the gradiant on a ramp?
Divide the height of the ramp by the length of the ramp (rise over run).
How would the input force needed to push a wheelchairup a rampchange if you increased the height of the ramp but not it's length?
The input force would increase as the height of the ramp increased. It wouldn't matter the distance. Ask me another one.
Which describes how the IMA of this ramp compares with the IMA of the ramp that has a height of 1m?
The ideal mechanical advantage (IMA) of a ramp with a greater height will be higher compared to a ramp with a shorter height. This is because the IMA is calculated by dividing the length of the ramp by the height, meaning a higher height will result in a larger IMA.
How do you find a ramp's mechanical advantage?
To find a ramp's mechanical advantage, you would calculate the ratio of the length of the slope to the height of the slope. This ratio indicates how much force is required to move an object up the ramp compared to lifting it vertically.
How do you calculate the ideal mechanical advantage of an inclined plane?
Its the reciprocal of the sine of the ramp angle. > 1 / ( sin ( ramp angle ) )
Why does the height of a ramp affect the distance?
The height of a ramp affects the distance because it determines the angle at which an object is launched off the ramp. A higher ramp will result in a greater launch angle, allowing the object to travel a longer distance compared to a lower ramp. This is due to the increase in the horizontal component of the initial velocity imparted to the object.
