the rate that water is coming into the pool, is the amount of water in the pool (x) divided by the amount of time it take to fill the pool. x / 10 the rate to empty the pool is x / 15 the rate to fill the pool wile it is being emptied, is the rate filling the pool minus the rate emptying the pool. x / 10 - x / 15 simplified 3x / 30 - 2x / 30 this gives x / 30 divide the rate the pool is filling, by the amount of water. (x / 30) / x this gives a time of 30 hours to fill the pool.
The perimeter of the pool is 2*(10+5) = 30 feet. So you would need 30 tiles.
Cannot be answered with only these measurements. For a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
1,770 gallons 10x10x3x5.9=
It depends how deep the pool is
Not likely
I have a 10 x 30 pool but i don't seem to need a pump and filter!
the rate that water is coming into the pool, is the amount of water in the pool (x) divided by the amount of time it take to fill the pool. x / 10 the rate to empty the pool is x / 15 the rate to fill the pool wile it is being emptied, is the rate filling the pool minus the rate emptying the pool. x / 10 - x / 15 simplified 3x / 30 - 2x / 30 this gives x / 30 divide the rate the pool is filling, by the amount of water. (x / 30) / x this gives a time of 30 hours to fill the pool.
The perimeter of the pool is 2*(10+5) = 30 feet. So you would need 30 tiles.
Cannot be answered with only these measurements. For a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
It is generally recommended to wait about 30 minutes to an hour after adding chemicals to a pool before entering to allow the chemicals to disperse evenly throughout the water and avoid skin or eye irritation. Always follow the specific instructions provided on the chemical packaging for the most accurate guidance.
Can you use 10-30 weight instead of recommended 30 weight in a 26 horsepower lawn mower
1,770 gallons 10x10x3x5.9=
i have a pool that has a 10 by 30 foot width/length and a 4 to 11 ft shallow to deep end depth ; how man gallons, an estimate is this? the pool is a standard square?
Yes, you can use 5w 30 oil in your banshee. You can also use 10 w 30.
The first pump fills (1/10th) of the pool in 1 minute.The second pump fills (1/15th) of the pool in 1 minute.With both running, they fill(1/10 + 1/15) = (3/30 + 2/30) = 5/30 = 1/6th of the pool in 1 minute.They have to run for [ 1 / (1/6) ]= 6 minutes in order to fill the pool.
Use the law of Pythagoras to calculate the diagonal.