0
What else can I help you with?
What do you need to hook up to a kinetic loudspeaker ka 8100?
To hook up a Kinetic Loudspeaker KA 8100, you need an appropriate audio source, such as an amplifier or receiver, that can drive the speaker. You'll also need speaker wire to connect the speaker terminals to the amplifier's output. Ensure that the amplifier's power rating matches the speaker's specifications to avoid damage. Additionally, a suitable power source for the amplifier is necessary if it requires external power.
How many nines in 30?
There are three nines in the number 30. This can be determined by dividing 30 by 9, which equals 3 with a remainder of 3. The quotient represents the number of nines in 30, which is 3.
What is 6 nines minus 2 thirds?
To subtract fractions, we first need to find a common denominator. The common denominator between 9 and 3 is 9. So, 6 nines is equal to 6/9 in fraction form, and 2 thirds is equal to 6/9. Subtracting 6/9 - 6/9 equals zero. Therefore, 6 nines minus 2 thirds is equal to zero.
How do you convert a 1991 Pontiac Firebird from a V6 to 350 V8?
all u need to do is pull the v6 and the wiring harness out of the car and install v8 with new harness.. v8 will fit right in the v6 frame
How do you graph seven vertices with two bridges?
Assuming that each bridge can connect at most two vertices, you will need at least 4 bridges to connect seven vertices. Conversely, two bridges will connect at most four vertices.
If you don't have harness adapters for the door speakers can you cut off the speaker wiring harness and connect the wires to your new speakers on a 2004 Ford Explorer sport-trac?
AnswerTry to buy ford speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon
How do you replace rear speaker 4 wire to a 2 wire grand am 2002 gt?
To replace the rear speakers in a 2002 Grand Am GT that has a 4-wire setup with a 2-wire speaker, you'll need to identify the positive and negative wires from the original 4-wire harness. Typically, two of the wires will be for each speaker (positive and negative). Connect the positive wire from the 2-wire speaker to one of the positive wires from the harness, and connect the negative wire to one of the negative wires. Ensure proper connections and insulation to avoid shorts.
How is an aftermarket stereo installed in an Impala?
you need to buy the wire harness for the car itself then you need to connect it to the stock wire harness, after that, you need to go ahead and strip it and wire it to your new CD players harness and then you will need to screw in and install the new head unit.-Shocker
How do you replace a stereo in a 2002 impala?
you need to buy the wire harness for the car itself then you need to connect it to the stock wire harness, after that, you need to go ahead and strip it and wire it to your new CD players harness and then you will need to screw in and install the new head unit.-Shocker
How can I connect a microphone to a speaker?
To connect a microphone to a speaker, you will need an audio cable with the appropriate connectors. Plug one end of the cable into the microphone and the other end into the input on the speaker. Adjust the volume levels on both the microphone and the speaker to ensure clear sound output.
How do you put a CD player in a 2002 impala?
you need to buy the wire harness for the car itself then you need to connect it to the stock wire harness, after that, you need to go ahead and strip it and wire it to your new CD players harness and then you will need to screw in and install the new head unit.-Shocker
How do you remove front drivers side Bose speaker on a 1990 corvette?
The 1990 Chevy Corvette front drivers side speaker cover will need to be removed. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
How do you change the speakers in your 2001 VW Passat Do you need to remove the door panel and if so how?
You do not need to remove the door panel to change your speakers. Remove the speaker cover, by prying outward on the speaker cover retaining clips. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
What color are the Rear speaker wires on a 1992 Toyota 4 runner?
On most they have a built in amp so you need a wiring harness
Removing speakers Chevy blazer 2 door rear?
You will need to remove the rear door speaker covers. The Chevrolet blazer speaker covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the speaker wiring harness.
How do you connect a 5.1 speaker to 5.1 DVD player?
You may need to reask your question, it does not make sence...
Can you install a new car radio if you cut the old wiring harness?
Yes, it just takes longer. If you haven't cut the old harness yet, you can buy a kit for your stereo to plug in to the existing harness. If it is already cut, you will need to figure out which wires are which (accessory, constant/memory, LF speaker, RR speaker, etc) and then splice them all together. Info on the harness for your car (which color wire is what) should be available on the net.
