0
Add your answer:
Earn +20 pts
What is a half round wood file good for?
A half round file is good for work with any wooden project sand round corners
How did the Arabs first learn to make paper?
Out of wood
How many linear feet of wood do i need of decking for a 12 foot by 12 foot deck?
It depends on how wide your lengths of wood are.
How many meters of wood would you need to cover 20 square meters?
This question cannot be answered as it stands. Meters and square meters are different in that one is length and the other area. To answer this, you would need to specify the dimensions of the wood that you are using to cover the floor. If you are using 5cm wide strips of wood, then you would need 20m^2 / .05m = 400 linear meters of wood strips. Then add 10% for cuts,knots and mistakes.
How many piece of foot wood do I need make apen of30in long and 45in wide?
it depends how high it is
Do you need to sand to tile properly on wood?
no
Sand paper needed to refinish furniture?
Sometimes you need sand paper to strip wood from furniture.
How do you separate sand from sugar and wood chip?
To separate sand from sugar and wood chips, you can use a combination of sieving and filtration. First, sieve the mixture to separate sand from sugar and wood chips. Then, use filtration to separate sugar from wood chips, as sugar can be dissolved in water while wood chips cannot.
In which direction do you sand wood?
never sand wood across the grain always sand with the grain
Which direction do you sand wood?
never sand wood across the grain always sand with the grain
What is the best way to refinish wood rocking chairs?
The best way to refinish any type of wood on any furniture is to sand it down, either with a power sander, or sand paper. Then you need to get some wood stainer or re-finisher.
How do you paint unfinished cabinets with epoxy?
Epoxy paint is a 2-part coating, consisting of a catalyst and a resin. When combined, these two components harden into a durable coating, able to withstand a great amount of duress. It can be used on unfinished wood but you must sand and prime the wood first.
Should you prime wood trim prior to painting with trim paint?
If you prime first, you will ensure that you have a consistent finish.
What was the first violin made out of?
maple wood and wire or string
What does water drain faster out of wood or sand?
sand
When doing wood finishing do you need to sand the old stain completely if the new stain is much darker?
I agree with Charles. I would also sand the piece of wood with the stain a bit then apply the darker stain.
Can you paint pine wood white?
Yes, pine wood can be painted white. It is important to properly sand and prime the wood before applying the white paint to ensure a smooth and even finish. Be sure to use paint that is suitable for wood and apply multiple coats for best results.
