Yes, an ammeter typically has positive and negative terminals, which are used to indicate the direction of current flow. When connecting an ammeter in a circuit, the positive terminal should be connected to the more positive point in the circuit, while the negative terminal should be connected to the more negative point. This ensures accurate readings of the current flowing through the circuit. However, some ammeters can measure current in either direction without damage, depending on their design.
Chat with our AI personalities
Look for a + by the positive terminal and a - by the negative terminal, or red for positive, black for negative. Some batteries have the positive terminal protruding and the negative terminal flat. Or you can get a meter that will tell you which is which,
What happens when you inadvertently crossed the positive battery terminal from a negative to a positive and a positive to a negative.?Read more: What_happens_when_you_inadvertanly_crossed_the_positive_battery_terminal_from_a_negative_to_a_positive_and_a_positive_to_a_negative.
plus is the positive terminal (cathode) minus is the negative terminal (anode)
Depending on colours of course black is usually negative and the other colour (generally red but depends) is positive. Get a D-cell Battery. Now get two pieces of speaker wire. hold one wire on the positive terminal of the battery and hold the other on the negative side of the battery. touch the wires to the positive and negative posts on the speaker. if the cone moves out ward the positive and negative are correct if it moves inward then the positive and negative are reversed (out of phase.) this simple test will allow you to see which terminal is which. Get a D-cell Battery. Now get two pieces of speaker wire. Hold one wire on the positive terminal of the battery and hold the other on the negative side of the battery. Touch the wires to the positive and negative posts on the speaker. If the cone moves outward the positive and negative are correct if it moves inward then the positive and negative are reversed (out of phase.) this simple test will allow you to see which terminal is which.
im not sure how clearly your phrasing your question, but when dealing with circuits potential difference (voltage) is max, and at the positive terminal its zero. it decreases as you go around the circuit. hope this helps