0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the difference between a 4-digit reference and a 6 digit reference?
To locate points on the Earth's surface, we can use either rectangular coordinate system or geographic coordinate system.4digit or 6 digit reference systems are under rectangular ( projected) system.Their difference lies in assigning Easting and Northing. 4 digit RS uses 2 Easting numbers and 2Northing numbers to show the location of points where as 6 digit uses 3 Easting and 3 Northing numbers. If there is any Hesitation please Well come.
Do the vertical grid lines easting?
Yes.
How much could 5 go on into 0?
How can you divide five into northing. When there is northinf there , you cannot divide it . Hence five does not divide into '0'.
What is X squared times negative x squared?
If you mean -(x^2) * x then the answer is -x^3 if you mean (-x)^2 * x then the answer is x^3
X plus 6 divided by x?
This question is ambigous. If you mean (x+6)/x then it simplifies to 1 + (6/x) If you mean x + (6/x) then it can't really be simplified.
What does easting mean on a map?
Easting means the x coordinate on a map. It measures the eastward distance. The other coordinate is Northing.
What comes first easting or northing?
Easting
What are the types of coordinates used in surveying?
Easting and Northing mostly
What is easting?
Easting along with northing are Cartesian coordinates for a geographic point. Easting refers to the eastward-measured distance (or x-coordinate). These coordinates are most commonly associated with the Universal Transverse Mercator (UTM) coordinate system.
What direction always goes first in grid reference?
In a grid reference, the easting (horizontal) direction is always mentioned before the northing (vertical) direction. For example, in a reference such as "Grid Square E5," the letter denotes the easting direction and the number denotes the northing direction.
Formula to convert latitude and longitude in to easting and northing?
You can convert latitude and longitude to easting and northing using a map projection system like Universal Transverse Mercator (UTM) or a local grid system. Each system has its own specific formulas for the conversion based on the geographic coordinates and the projection parameters. It's recommended to use specialized software or tools for accurate conversions.
What is the difference between a 4-digit reference and a 6 digit reference?
To locate points on the Earth's surface, we can use either rectangular coordinate system or geographic coordinate system.4digit or 6 digit reference systems are under rectangular ( projected) system.Their difference lies in assigning Easting and Northing. 4 digit RS uses 2 Easting numbers and 2Northing numbers to show the location of points where as 6 digit uses 3 Easting and 3 Northing numbers. If there is any Hesitation please Well come.
Where is Northing 10000000 Easting 500000?
The coordinates Northing 10000000 Easting 500000 are typically used in the Universal Transverse Mercator (UTM) coordinate system. To determine the location, you would need to know the specific UTM zone or region the coordinates refer to, as location interpretation in UTM coordinates depends on the zone.
What is the formula of the intersection of two lines?
Given coordinates of two points and directions (bearings or azimuths) from those two points, find the coordinates of the point of intersection, assuming that the lines do intersect and are not parallel. Use the Cantuland method to calculate the coordinates of the northing and the easting. This is a simplification of a process that came from the use of simultaneous equations from matrix algebra that employed a trigonomic identity for tangent functions.Northing of the point of intersection:1. Convert the azimuth of the first line to degrees and decimal degrees.2. Find the tangent of the azimuth of the first line.3. Step-two, times the northing of the point on the first line.4. Step-three, minus the easting of the point on the first line.5. Convert the azimuth of the second line to degrees and decimal degrees.6. Find the tangent of the azimuth of the second line.7. Step-six, times the northing of the point on the second line.8. Step-seven, minus the easting of the point on the second line.9. Step-four, minus step-eight.10. Step-two, minus step-six.11. Step-nine, divided by step-ten. That's the northing of the intersection.Now let's find the easting. Most of the steps are the same, except a little bit is added into the process. See steps 4A, 8A and 9.Easting of the point of intersection:1. Convert the azimuth of the first line to degrees and decimal degrees.2. Find the tangent of the azimuth of the first line.3. Step-two, times the northing of the point on the first line.4. Step-three, minus the easting of the point on the first line.4A. Step-four, times step-six.5. Convert the azimuth of the second line to degrees and decimal degrees.6. Find the tangent of the azimuth of the second line.7. Step-six, times the northing of the point on the second line.8. Step-seven, minus the easting of the point on the second line.8A. Step-eight, times step-two.9. Step-4A, minus step-8A.10. Step-two, minus step-six.11. Step-nine, divided by step-ten. That's the easting of the intersection.This works unless the azimuth of one of the lines is 90 degrees or 270 degrees. Tangent of the azimuth of 90 degrees or 270 degrees will result in "undefined", and the above will not work. In this case, swap all calls for "easting" to "northing"; and swap all calls for "northing" to "easting"; and swap the calls for the Tangent function to replace them with Cotangent functions. This adjustment to the process will work for all intersections except when the azimuth of one of the lines is zero degrees or 180 degrees. In those cases, use the unmodified steps as outlined above to take care of those issues.
How do you use Leica Total Station for stake out survey?
after pressing the stake out button go to start,then press down arrow 2 times,then press manual and then enter the easting and northing ans press ok.....fix the bearing .....thats it
What are rules for reading grid references?
When reading grid references on a map, start by identifying the easting (horizontal) coordinate, followed by the northing (vertical) coordinate. Ensure you read the numbers accurately and place them in the correct order to pinpoint the location on the map.
What is a six grid references?
A six figure grid reference is a more detailed type of grid reference. Basically you divide the squares into 100 smaller squares then write a three figure easting then a three figure northing all you really have to do is take away the decimal point
