0
To find the value of t in the given perimeter equation, we need to use the formula for the perimeter of a rectangle, which is P = 2(length + width). Assuming 12.3 ft is one side (length) and t ft is the other side (width), we set up the equation: 2(12.3 + t) = 40.2. Solving for t, we simplify to 12.3 + t = 20.1, yielding t = 20.1 - 12.3 = 7.8 ft. Thus, the value of t is 7.8 feet.
What else can I help you with?
What is 150 percent of 6 feet?
To find 150 percent of a value, multiply the value by 1.5. In this instance, 1.5 x 6 = 9 feet. Therefore, 150 percent of 6 feet is equal to 9 feet.
Find the length of the longest side of the rectangle is its perimeter is 25 feet?
Any value greater than 6.25 feet.
Why do you divide to change from feet to yards?
Because there are 3 feet to one yard. if you had 30 feet, to find the number of yards, divide 30 by 3, changing the value from feet to yards- so 30 feet becomes 10 yards.
How can you find the diameter of a circle with a radius of 20ft?
Double the value of the radius which in this case is 2*20 = 40 feet
A yard is equal in length to three feet. The function F(y) takes a measurement in yards (as input) and returns a measurement in feet (as output). What input will return a value of 30?
To find the input that returns a value of 30 for the function F(y), we can set up the equation based on the conversion factor: ( F(y) = 3y ). To find the input y that results in 30 feet, we set ( 3y = 30 ). Solving for y gives us ( y = 10 ). Therefore, an input of 10 yards will return a value of 30 feet.
What is 150 percent of 6 feet?
To find 150 percent of a value, multiply the value by 1.5. In this instance, 1.5 x 6 = 9 feet. Therefore, 150 percent of 6 feet is equal to 9 feet.
Find the length of the longest side of the rectangle is its perimeter is 25 feet?
Any value greater than 6.25 feet.
Why do you divide to change from feet to yards?
Because there are 3 feet to one yard. if you had 30 feet, to find the number of yards, divide 30 by 3, changing the value from feet to yards- so 30 feet becomes 10 yards.
How can you find the diameter of a circle with a radius of 20ft?
Double the value of the radius which in this case is 2*20 = 40 feet
Line of verse with six iambic feet?
Behold Destroy Submit Collide
Where can you find the cable resistance value per feet?
In the National Electric Code Book or in an Ugly's Electrical Reference book.
What value is the empire francais 1854 centimes napoleon111 empereur has eagle with letter B at its feet?
The best way to find the value of the 1854 centimes, Napoleon111 empereur, empire Francais with a picture of an eagle and the letter B at it's feet is to take it to a coin dealer. The value is going to depend on the condition of the coin.
How do you write the conversion factor you would multiply by inches to feet?
The large value converting to small value is multiplied. The small value converting to large value is divided. inches (small value) to feet (large value) is divided. The number of inches in a feet is 12 inches, so to convert inches to feet, one would need to divide the number by 12.
What is the insulation or r value of water 2 feet thick?
What is the r value of water 2 feet thick
A yard is equal in length to three feet. The function F(y) takes a measurement in yards (as input) and returns a measurement in feet (as output). What input will return a value of 30?
To find the input that returns a value of 30 for the function F(y), we can set up the equation based on the conversion factor: ( F(y) = 3y ). To find the input y that results in 30 feet, we set ( 3y = 30 ). Solving for y gives us ( y = 10 ). Therefore, an input of 10 yards will return a value of 30 feet.
How do you convert meter into square feet?
To convert meters to square feet, you need to know the conversion factor between meters and feet. Since 1 meter is equal to approximately 3.28084 feet, you would first convert the length in meters to feet. Once you have the length in feet, you would then square that value to find the area in square feet. For example, if you have a length of 5 meters, you would first convert that to approximately 16.4042 feet, and then square that value to find the area in square feet.
How many feet is 65 cm?
65 centimeters = 2.132 545 931 8 feet (value in feet)= (value in centimeters)/30.48 = (65)/30.48 =2.13
