Paint coverage differs depending on brand and type of paint. Most (if not all) paint cans will indicate that one gallon covers so many square feet.
For example, Paint A says one gallon covers 200 square feet.
That means 200 square feet will require one gallon, 50 square feet will require one quart, 400 square feet will require two gallons, etc.
5
It is: 2200/400 = 5.5 and so 6 cans will be needed
Cans of paint needed: 2200/400 = 5.5 therefore 6 cans are needed
The coverage of paint can vary based on the type and brand, but a general estimate is that 1 liter of paint covers about 10 to 12 square meters. Therefore, 16 liters of paint would typically cover approximately 160 to 192 square meters. It's always best to check the specific paint can for coverage details, as it may differ.
It depends on the paint. It should say on the can how much it will cover.
Answer--------------------First open MS-Paint ---> select rectangle tool ---> now, to draw a square, press shift and drag (till square does not fits your size requirement) OR to draw a rectangle drag free (without shift).----------- ends!!!!Hope this helpsCheers-------------------------
A gallon of paint one coat will cover about 300 square feet; if surface is very smooth about 400 sq ft,and if very rough maybe 150-200 sq feet
l
There is not enough information in this question to correctly answer it, however, here is the formula you will need to find the amount needed to paint the walls only. If you have to paint the ceiling and/or the floor add the square footage to your Area(15 + 12 x 2) x y = Area Where y equals the height of the room.Check the label of your paint and determine the area in square feet of coverage. (ie. 400 sq.ft./gal) This is CoverageDivide your Area by Coverage to calculate the amount of paint needed
About $0.40 a square foot per coat plus paint
195
The formula to calculate the area of a circle is A = πr^2, where r is the radius of the circle. Given that the radius is 60m, we can substitute this value into the formula: A = π(60)^2. Calculating this, the area of the circle with a radius of 60m is approximately 11,304.37 square meters.
you will need 5 cans of paint.
Depends on how much paint used, how many coats, type of paint, how thick the paint is.
Depends on the quality of the paint. To estimate the cost per square foot, divide the cost of the paint by 350, for square meters, divide the cost by 32.5 and that should give you a pretty good idea of what it will cost for one coat of paint.
root 484 ie 22 feet
what is the average cost to paint a 2700 square foot house in Maryland