0
The Foxconn 648x7mf-s motherboard, which is based on the SiS 648FX chipset and uses the Socket 775, does support Hyper-Threading, but this feature is dependent on the CPU installed. If you use a compatible Intel processor that supports Hyper-Threading, such as certain models of the Pentium 4 or Xeon series, then Hyper-Threading can be enabled. However, ensure that your BIOS is updated to the latest version to fully utilize this feature.
What else can I help you with?
What is the recommended height of a meter socket from the ground?
the meter socket should be 1.8m from finished ground
What type socket is more likely to round the edges of a fastener?
A socket that is more likely to round the edges of a fastener is typically a standard six-point socket. This type of socket applies force on the flat sides of the fastener rather than its corners, which can lead to rounding if excessive torque is applied. In contrast, twelve-point sockets engage the fastener at more points but are generally less prone to rounding due to their design. Proper fit and application of torque are essential to avoid rounding, regardless of the socket type.
Why is a 9 mm not included in a hex socket set?
A 9 mm socket is often not included in standard hex socket sets because most metric socket sets typically start with sizes like 8 mm or 10 mm, which correspond to more commonly used fasteners. Additionally, many users find that the 10 mm socket covers the range of applications where a 9 mm might be needed, making the 9 mm less necessary. Sets are designed to balance versatility and cost-effectiveness, and including every possible size would increase complexity and price.
What is CB if P is 5?
126.5that should be the socket where you plug in the mike.
Can you change a 60W socket to a 100W socket on a table lamp?
Generally speaking, the rated power of any light fitting ('luminaire'), including a table lamp, is determined by the enclosure, shade, or reflector, rather than its socket. What it comes down to is (a) whether the rate of heat transfer away from the lamp is sufficient to prevent the luminaire from overheating, and (b) whether the reflector/shade can withstand the resulting temperature.
Will an Intel Pentium 4 3.0 GHz HT socket 478 work on a motherboard that doesnt support hyperthreading?
That depends on the chipset the motherboard uses. 865P, 850E, 845PE, 845GE, 845GV, 845E, and 845G chipsets will all work with a hyperthreading Pentium 4 (a BIOS update may be required to support hyperthreading capabilities). Older chipsets like the original 845 and 850 won't work.
HOW OLD IS foxconn winfast 760gxk8mc?
The Foxconn WinFast 760GXK8MC is a motherboard that was released around 2005. It is designed for AMD processors and supports the Socket 939 platform. As of 2023, this makes the motherboard approximately 18 years old.
What determine which processors a board can support?
the socket and the chipset
What determines which processors a motherboard can support?
The socket type that it uses
What is PAC 418?
Socket PAC418 is a 418 pin microprocessor socket designed to interface an Intel Itanium processor to the rest of the computer (usually via the motherboard). It provides both an electrical interface as well as physical support. This socket is designed to support a microprocessor module.
What type of memory is needed for the foxconn p55mx lga 1156 Intel p55 micro atx Intel motherboard?
Use DDR3 - two module 4GB each, with processors socket 1156 corei3-i5-i7 this motherboard is off line, off sale... buy a new!
What are the functions of a CPU slot?
CPU slot(s) and/or socket(s)The type of CPU slot or socket determines which processors the motherboard can use. The most popular CPU connectors are Socket 370 (late-model Intel Pentium III and Celeron processors), Socket A (AMD Athlon and Duron), Socket 478 (current Celeron and Pentium 4), Socket 423 (old-style Pentium 4), Slot 1 (old-style Pentium II/III and Celeron), Slot A (older-style Athlon), and the obsolete Socket 7 (Intel Pentium and AMD K6-* processors). Some motherboards have two or more CPU connectors, allowing them to support multiple processors. A few motherboards have both Slot 1 and Socket 370 connectors, allowing them to support either type of CPU (but not both at once).There are three versions of Socket 370, which differ in pinouts and which processors they support. Early Socket 370/PPGA motherboards support only older Mendocino-core Celeron processors. Later Socket 370/FC-PGA motherboards support Coppermine-core Pentium III FC-PGA processors and Coppermine128-core Celeron FC-PGA processors. The final Socket 370 motherboards, which Intel refers to as "Universal" models, support any Socket 370 processor, including Tualatin-core Pentium III and Celeron processors. Although Socket 370 is now obsolescent, tens of millions of Socket 370 systems remain in use. When you upgrade such a system it is important to check the documentation to determine which Socket 370 variant that system uses.
What two features of a motherboard determine which processors a board can support?
Processor socket and chipset
Why is the shoulder socket deeper than the hip socket?
The shoulder socket is deeper than the hip socket because the shoulder joint sacrifices stability for mobility. This design allows for a greater range of motion at the expense of stability. In contrast, the hip joint is designed for weight-bearing and stability, so it has a shallower socket to provide better support for the body.
Will A processor designed for socket 1155 work in a motherboard with socket 1156?
No, a processor designed for socket 1155 will not work in a motherboard with socket 1156. The two sockets have different physical designs and pin configurations, making them incompatible with each other. Additionally, the chipsets associated with each socket support different features and technologies. Therefore, it is essential to match the processor and motherboard socket types correctly for proper functionality.
What is the purpose of a lamp socket ring and how does it contribute to the functionality of a lamp?
The purpose of a lamp socket ring is to secure the lamp socket in place within the lamp base. It contributes to the functionality of the lamp by providing stability and support for the socket, ensuring that the bulb remains securely in place and making it easier to replace the bulb when needed.
Is socket 423 an Intel Processor Type?
Yes, Socket 423 is indeed an Intel processor type. It was introduced in 2000 to support the Pentium 4 processors, specifically the early models. This socket was part of Intel's transition to the NetBurst microarchitecture and was succeeded by Socket 478, which supported later Pentium 4 variants.
