answersLogoWhite

0

That is extremely simple. Think about it next time if 1ft = 3cm then 18ft = 3cm x 18 which then equals 54cm so the main mast on the model sail boat will be 54cm

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Math & Arithmetic

An architect designed a building that was 64 feet high. He made a model of the building using a scale of ¾ inch equals 1 foot. How high was the model?

It was 48 inches high !


Which is a smaller scale 1 inch equals 100 miles or a map on which 1 inch equals 200 miles?

Remember it this way: If you had two model submarines of the same boat, one was 1:50 scale and one was 1:200 scale, which model would be larger?


The area of the scale model of a playground is 6 square yards. The scale model is enlarged by a scale factor of 3 to create the actual playground. What is the area of the actual playground?

To find the area of the actual playground, you need to square the scale factor of 3, which equals 9. Then, multiply the area of the scale model (6 square yards) by this squared scale factor to get the area of the actual playground. Therefore, the area of the actual playground is 6 square yards multiplied by 9, which equals 54 square yards.


What is a scale model in math terms?

a scale model ~aka~(Scale drawing) in math terms is - The process of drawing a figure either enlarged or reduced in size from its original size. Usually the scale is given, as on a map 1 inch equals 10 miles.----http://dpi.wi.gov/standards/mathglos.html


How big is 1.50 scale model?

A 1.50 scale model means that every unit of measurement on the model represents 1.50 units in real life. For example, if a building is 1.50 meters tall in the model, it would be 3 meters tall in reality. This scale is often used in architectural models to provide a clear representation of larger structures while maintaining manageable dimensions.

Related Questions

An architect designed a building that was 64 feet high. He made a model of the building using a scale of ¾ inch equals 1 foot. How high was the model?

It was 48 inches high !


Danielle construct a scale model of a building with a rectangular base. Your model is 2 inches in length and 1 inch in with. The scale on the model is 1 inch equals 47 feet. What is the actual area, in square feet, of the base of the building?

4418 by the power of 2


A scale model of a sailboat is 6 inches long. If the sailboat is 30 feet long find the scale of the model.?

6 inches is 1/2 foot, so (1/2 ft) / (30 ft) = 1/60, or it may be designated as 1:60 scale.


What is Scale Model Car Building?

Answer Scale, in this sense is the replication of an object, in this case, a 1/3 scale model of a car, will be 1/3 the size of the original car. building cars out of scales


What model sailboat was used in the movie Suicide Kings?

In the movie "Suicide Kings," the model sailboat featured prominently is a 1:12 scale model of a classic yacht, specifically a 1930s-era design. The sailboat serves as a significant motif throughout the film, symbolizing themes of control and manipulation. Its presence adds depth to the characters' dynamics and the unfolding plot.


A scale model of a building is 2.3-feet high The ratio of the height of the model to the height of the building is 1156 How tall is the building in feet?

-1153.7


Building a model of an object to scale means that the height of the object is to the height of the model?

proportional


Give an example of a physical model and explainone limitation of the model.?

An example of a physical model is a scale model of a building. One limitation of this model is that it may not accurately reflect the structural behavior of the full-scale building under all conditions, due to scaling effects and material differences.


What is a smaller copy of a building often made to scale called?

Model or maquette


Building a model of an object to scale means that the height of the object is what to the height of the model?

When building a model of an object to scale, it means that the height of the object is proportionally greater than the height of the model. Usual scales are 1:100 or 1:144, meaning that if the height of the model is 3 feet, the height of the actual building would be 300 feet or 432 feet.


Which is a smaller scale 1 inch equals 100 miles or a map on which 1 inch equals 200 miles?

Remember it this way: If you had two model submarines of the same boat, one was 1:50 scale and one was 1:200 scale, which model would be larger?


How big is a 1-38 scale model?

39