Wt is the formula to convert cgpa to percentage in 10 point scale
mm is millimeters & wt is weight
The abbreviation for penny is d, from the Roman denarius. The wt is an obvious abbreviation of weight.So penny+weight = d+wt = dwt
weight of ISMC 400
Answer: 170ml of 5% acid must be added to30 ml of 25% to get 200ml of 8% acidLet x = wt of 5% acidy = wt of 25% acidEquations:x + y = 200ml ----equation 10.05x + 0.25y = 0.08(200)0.05x + 0.25y = 16 -----equation 2multiply equation 2 by 1005x + 25y = 1600 -------equation 3multiply equation 1 by -5-5x -5y = -1000 ------- equation 4eliminateequations 3 and 45x + 25y = 1600-5x - 5y = -1000=====================0 +20y = 600divide by 20y = 30substitute y = 30 in equation 1x + 30 = 200x = 200 - 30x = 170
Take 1.45 wt% oxide as an example. To remove the oxide component first you must work out the Ti component: 1.45 wt% oxide x 0.6 = Ti (wt%) because Ti in TiO2 makes up 60% its formula mass: 47.87 / 79.87 = ~0.6 Ti Thus 1.45wt% TiO2 = 0.87 wt% Ti
To convert ppm to wt%, you need to divide ppm with 1000000 to get to wt%.For example:If you have 4000ppm, it is the same as 0.004 wt%.I dont agree with this answere.Actually 4000ppm means 4000mg in 1Kg (1000g). Hence a simple solution is as under;1000g contains 4000mgor1000g contain 4 gm. Hence 100g will contains 0.4 grams. This is the answere i.e. 0.4%because % means amount present in 100 grams.The first answer above should be:To convert ppm to wt% (percent by weight), you need to divide ppm by 10,000.For example:If you have 4000 ppm, it is the same as 0.4 wt%.If a lab result for the concentration of lead (Pb) in a paint chip sample is 10,400 ppm, the concentration in percent lead by weight is 1.04. If the result is reported as 1.04 % Pb by weight, then the concentration can be converted to 10,400 ppm.
Wt is the formula to convert cgpa to percentage in 10 point scale
The density of 35 wt% sulfuric acid is 1.174 g/cm^3. To convert weight percent to molarity, you first need to calculate the molar mass of sulfuric acid (98.08 g/mol). Then, using the density and molar mass, you can calculate the molarity (11.9 M) using the formula: Molarity = (wt% * density) / (molar mass).
Veq = 133000*(Condensate specific gr/Mol wt of condensate) in SCF/STB Where, Mol wt of condensate = 6084/(API-5.9)
"wt"?
The Earth's crust is primarily composed of oxygen, silicon, aluminum, and iron. These elements make up about 99% of the crust's chemical composition, with other elements such as calcium, sodium, and potassium also present in smaller amounts.
wt is an abbreviation for weight
Swedish Crown, called Krona (pl. Kronor, short form Kr.) in Swedish (international code: SEK) 1 USD = 7,02819713 SEK (as of 09/10/08) Cheers! =)
Take the wt and cube it.
To convert ppm mole of H2O to ppm wt in natural gas, you need to know the molecular weight of water (H2O), which is 18 g/mol. Once you have this information, you can use it to convert between the two units. This conversion involves considering the molecular weight of the components in the mixture.
mm is millimeters & wt is weight