0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Find a decimal representation of 25 over 33?
25/33 = 25 ÷ 33 = 0.757575.... ≈ 0.758
What is 33 percent of 33?
To find 33 percent of a number, multiply the number by 0.33. In this instance, 0.33 x 33 = 10.89. Therefore, 33 percent of 33 is equal to 10.89.
What percentage is 33 of 44?
To find the percentage of 33 out of 44, divide 33 by 44 and multiply the result by 100. So, 33 is approximately 75% of 44.
The area of a square is 33 km2 Find the length of a side And then round your answer to one decimal place?
33
Find three consecutive integer that have a sum of 96?
31+32+33 = 96
Why did they stop making 78 RPM records?
They stopped making 78 RPM records because they became outdated and technology was advancing. After the 78 RPM records of the 1900's, the 33 1/3 RPM records were created.
Vinyl records make how many rounds per minute?
there are several speeds for vinyl records, but for common formats it is 33 rpm, 45 rpm, 78 rpm and actually 33 1/3 rpm. that's what they were called 45's because they made 45 revolutions or rounds but it's actually revolutions per minute.
What is the difference between 45 rpm and 33 rpm Vinyls?
The 45 RPM records or vinyls sound as they were intended to sound when played at 45 revolutions per minute (at the 45 setting on a record player) while the 33 RPM records sound right at the 33 revolutions per minute speed. Then, there is the issue of size. Records that are 33 RPM are larger in diameter than 45's. Also 33's can hold more songs than 45's do. Usually, 45's have only one song on a side and were used as demo records for radio stations (yes, radio stations used to play music on records before they went to tapes and now to digital music on computers) and for releasing "singles" so that people could listen to a new band without having to pay for a whole album. 45 RPM records or vinyls are recorded at 45 revolutions per minute and are consequently played back at the same speed to achieve exact replication of the original recording. Subsequently, 33 1/3 RPMs are recorded at that speed, and played back at that speed to hear the audio as it was recorded. Generally 45s are recorded on smaller 7" disks, whereas 33 1/3s are recorded on larger, full sized 12" disks. This is not always the case, as some 12" records are recorded at 45 RPM for higher, or audiophile, sound quality.
Why are records dragging on your record player?
They typically drag because that's how they make sound. If it didn't dray there would be no music. If you mean that it sounds slow, that is because as stated above, it is part of the process. Better turntables have a strobe to adjust the timing, or speed of the rotation to keep it at 33 rpm or 45 rpm or 78 rpm. Which brings me to the next part of the answer. Make sure that the speed of the turntable matches the speed of the recording. Playing a 45 rpm record at 33 rpm will sound very slow and dragging. Most record players and turntables have a selector for 33 and 45 rpm. 78rpm records use a different needle, and not all players will play these older format records.
What sizes do vinyl records come in?
The most common 33-1/3 RPM record was 12", the 45 RPM was 7", and the 78 RPM was cut in both 12" and 16". Source: Wikipedia "also 10" vinyl"
What are the number 78 on record player?
The number referred to the speed of the turntable in revolutions per minute (RPM). Vinyl records were recorded at various RPM. 33 1/3, 45, and 78
What album did the Beatles do on a 33 record?
They were all on 33 rpm records. In that era, the vinyl record was the latest, most accurate rendition of audio available. CDs and MP3s were not invented at that time.
When was the 45 rpm record invented?
The 45 RPM record was developed by RCA Victor in 1949 as a competing format for the 33 1/3 RPM (33) format of rival Columbia records that premiered in 1948. Eventually the 45 RPM format (7 inches in diameter with a one-inch center hole) was adopted for shorter recordings while 33 RPM (12 inches in diameter with a 1/4 inch center hole) was used for so called LP (long playing) albums. This eliminated the need to reduce the groove width or quality of 45 RPM recordings.
What does 45 RPM stand for in music?
45 revolutions per minute. This denotes the speed at which a turntable should be spinning in order to play a 45 record disc. when referring to records such as 45 RPM the RPM means: R= Rotations P= Per M= Minute these refer to the speed at which the disc was recorded and will be turned while being played on a turntable other speeds were also 78RPM (very old and very hard to find anymore) and 33 RPM which was the other common speed when records were the popular the 45's were about 8" in diameter and the 33's were about 11"or 12" in diameter. Hope this little bit of music history answers your question and fills your mind The above answer is pretty much on the money....I'll add my two cents worth........ I believe that RPM stands for REVOLUTIONS PER MINUTE. The old fashion record PLAYERS that played the "78's" were called phonographs and had only one speed- 78 RPM's. The more recent record PLAYERS usually had two speeds- 45 (RPM) and 33 1/3 (RPM). They could play the smaller vinyl records (or disks)- the "45's"- AND the larger vinyl records called "ALBUMS" or "LP's" (short for "long playing") at 33 1/3 RPM. The 45's had only one song on each side, while the LP's had multiple songs on each side. Now, everything is on a CD, but many times they still refer to them as "albums". REAL VINYL records and albums are not sold anymore, unless you go to a specialty record store that carries "antiques"!! <<<adr>>>
What RPM is the White album?
33 1/3
How many revolutions per minute does an LP turn?
Hello questioner, LP also known as Long Play records play at 33-1/3 rpm. Best regards, JF.
What is the value of very old Moms Mabley 33' vinyl records?
The value of old Moms Mabley 33 1/3 RPM records in excellent condition will depend on who is buying them. A collector of this type of record might pay $10 or more per album. The price of vintage items usually depends on what a buyer is willing to pay.
