0
Add your answer:
Earn +20 pts
How to find out diameter of cylinder?
It depends what you know. The top of a cylinder is in the shape of a circle. So, to find the diameter of the cylinder (which is also the diameter of the circle), if you know the radius, just multiply it by two.
What is the formula to find the volume for cylinder by using diameter?
The diameter, alone, is not enough to find the volume of a cylinder. You need the height as well. > Where pi = 3.1416, and d = cylinder diameter cylinder volume = pi * (d/2)2 * length of cylinder
How do you find the radius of a cylinder if you only have the diameter?
The radius is half the diameter.
How do you find the diameter of a cylinder if the radius is 3 and the height is 6 meters?
Your diameter is double the radius. So the diameter is 6
How do you find the radius of a cylinder if the diameter is 1.28 cm and the length is 3.76 cm?
The radius of the cylinder would be 0.64cm ! The radius is half the diameter - length has nothing to do with the question !
Is the bore of a cylinder the circumference?
The bore of a cylinder describes is measurement, in millimeters or inches, of the inside diameter of the cylinder. The diameter is the width across.
What is the other name for diameter of a cylinder?
BORE
What is cylinder bore?
This is the diameter of the cylinder hole in the engine block for the pistons.
Cylinder bore formula?
this is the diameter of the cylinder hole in the engine block for the piston
How do you measure the bore diameter of the cylinder?
With a inside measuring micrometer
The bore of the cylinder of a piston engine is normally ground with a slight choke?
Generally the nominal diameter of cylinder bore is kept little smaller at cylinder head than at the bottom. The engine head will be generally heat and it tends to expand for these high temperatures. To prevent the bore diameter at head to exceed diameter at bottom,piston engine bore is ground with a slight choke.
What is bore slugging?
Bore slugging is done by taking a lead cylinder(slightly larger in diameter than bore) and pounding it through the bore. Once it's through, you mic it with a caliper. This gives the bore's exact diameter.
What are the things to notice while purchasing an hydraulic cylinder?
You should notice a couple of things on purchasing an hydraulic cylinder, Bore Diameter: The diameter of the cylinder bore. Maximum operating pressure: The lowest working pressure is referred to as max. Operating pressure. Rod Diameter: Piston Diameter Type of Cylinder: Types of cylinder are ram cylinder, tie-rod cylinder and welded cylinder. Stroke: The travel distance of a cylinder is referred as stroke.
What is bore and stroke in a motorbike?
Bore is the diameter of the piston/cylinder, stroke is the distance the piston can travel between its highest position and its lowest position in the cylinder.
What is the effect of changing the engine cylinder bore diameter?
Enlarging the cylinder bore will increase cc's in a 2 stroke and ci's ina 4 stroke.....
What is an aircraft piston engine cylinder bore?
The bore refers to the Inside diameter of the cylinder. The Piston will be nearly the same diameter, with the piston rings making up the difference. Convert the bore to area by multiplying by pi and dividing by four, and multiply by the stroke and the number of cylinders and you have the volume displacement of the engine.
How do you find diameter of a cylinder?
the width of the cylinder
