0
How can you measure 1 gallon of juice out of a barrel if all you have available is a 3-gallon and a 5- gallon pitcher?
fill 3 gallon container with juice and poor into 5 gallon container you now have 3 gallons in he container. now refil the 3 gallon container and fill the 5 gallon the rest of the way. now you have used up 2 gallons filling the 5 gallon container and you have 1 gallon left in the 3 gallon container.
What else can I help you with?
How can you measure 1 gallon of juice out of a barrel if all you have available is a 3 gallon and a 5 gallon pitcher?
Fill up the three gallon jug and pour it into the five gallon jug. Refill the three gallon jug and pour from it into the five gallon jug until it is full. What remains in the three gallon jug will be one gallon.
What do ammunition numbers mean?
They measure the width of the gun barrel in fractions of an inch. A 38 caliber will be .38 of an inch. The bullet projectile itself is a little less wide.
How do you calculate barrels per inch?
To calculate barrels per inch, you need to know the volume of the barrel in gallons and the dimensions of the barrel in inches. First, convert the barrel volume to cubic inches (1 barrel = 31.5 gallons = 3,785.41 cubic inches). Then, divide the total volume of the barrel by the height of the barrel in inches. The formula is: Barrels per inch = (Volume of the barrel in cubic inches) / (Height of the barrel in inches).
How many square meter in 1 cubic meter?
'Square meter' is a unit used to measure area or coverage, such as the floor of a room, or a piece of land. 'Cubic meter' is a unit used to measure volume or capacity, such as a bottle, or a barrel. These two units have different "dimensions", and are used to measure different types of quantities. Neither one can be converted into the other one.
What is 1-7 barrel twist?
1-7 barrel tw = -6
What is the total length of a 1873 winchester with a 20 barrel?
You must measure it. Different stocks were available.
How do you measure a pistol barrel?
From mouth of barrel to where it meets the cylinder.
Where do you measure from when determening the length of a shotgun barrel?
according to the batfe the barrel leghth is measured from the face of the (closed) bolt. if you stick a wooden dowl rod down the barrel and mark where the end of the barrel stops,pull it out and measure with a tape measure it will give you the proper barrel length.
When you measure a barrel for length is it the full length of the barrel or do you measure from the end of the hand grip?
Muzzle to bolt face
Which unit is most likely used to measure how much a barrel will hold?
A barrel!
How do you measure barrel length on your shotgun?
From the breech.
How do you measure shotgun barrel length?
From the breech
How can you measure 1 gallon of juice out of a barrel if all you have available is a 3 gallon and a 5 gallon pitcher?
Fill up the three gallon jug and pour it into the five gallon jug. Refill the three gallon jug and pour from it into the five gallon jug until it is full. What remains in the three gallon jug will be one gallon.
What are the different types of cable barrel ends available for connecting cables?
The different types of cable barrel ends available for connecting cables include straight, right-angle, and bulkhead barrel connectors.
How do you measure the barrel of a shot gun?
from the breach face to the muzzle
How do you get your pitcher not to be afraid of hitting the batter?
Have your pitcher only focus on the strike zone. Have him/her think they are a hunter. A hunter looks into the scope and looks straight down the barrel. In this case the barrel is the line from the pitcher's eyes to the strike zone. If he or she looks at the strike zone and the catcher's glove only, they should not have a problem with hitting batters.
What is a barrel bulk?
A barrel bulk is a measure equal to five cubic feet, used in estimating capacity, as of a vessel for freight.
