Gears are found in things like:clocks,bikes,cars,egg beaters,wind-up toys ect.
Multiplying Gears- a device that increases the rotational speedReducing Gears- a device that decreases the rotational speed
Yes. Line up them up when you're adding, too.
Wednesday's television line up included my favorite shows. The teacher told students to line up against the wall. Line up the numbers in your math problems.
It depends on the number of hitters in the line-up and on the strength of the entire line-up.
you turn the cam gear and the crank gear with a wrench until the lines on the pulleys/gears line up.
there are 2 marks on the gears you have to line them up
the gears come with a dot punched on each, line them up together,the cam one is down to the crankshaft one and the crankshaft one is up to the cam one so that they are exactly in line with each other almost touching each other
This is not the Yugo page, this is the Ford Escort page.
Use a spirit level (or even a ruler) and rest it on top of the timing gears. I think you know what to do next.
were are the time marks on the gears thank you clive
blind folded
cam time? should have 2 cam gears connected by chain usually, should be little marks on the gears. Line the marks up to point at each other.
how do i line up timing gears on 2.8 isuzu trooper
I'm looking for the same thing. Everything I read says to buy the repair manual. I can see the arrow by the crankshaft and the the dots on the cam gears. Some have said, "Line up cam gears" but what do we line them up with? On some mazdas there is a line on the backing plate . . I don't find one on the 929. With you I am still looking for an answer . . .
they are called witness marks. Line them up together when assembling the pump
there are marks or dots on each of the gears, two cam, and one crank, that need to line up with notches in the back cover. all three marks lined up with all three notches with the number one piston at tdc in the compression stroke. you can gently rotate the gears using a socket on the bolt at the center.