depends on the initial length of the spring, and how much force is required to stretch the spring
how to calculate the elbow radius or elbow length
-- Measure or calculate the length of one side. -- Measure or calculate the length of another side. -- Measure or calculate the length of the only remaining side. -- Add the three numbers. The sum is the perimeter of the triangle.
There is no formula to calculate the length of a wire. The length of a wire is determined by the distance from the power source to where the load is situated.
To calculate volume simply do length x width x height
To calculate the length of helical ring of pile, use the standard formula. The formula is pi D X the number of coils. "D" is the diameter of the coils.
is helical coil and coil spring are the same
Of or pertaining to, or in the form of, a helix; spiral; as, a helical staircase; a helical spring.
Helical springs are the typical, common, wound springs used in tension or compression. The term 'helical' comes from the spring being a helix- the wire is wound around a mandrel, advancing along the length of the mandrel as it is wound.
When a helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is primarily compressive stress. This stress is caused by the load that the spring is supporting, leading to a reduction in the length of the spring along its axial direction.
a balance that measure weight by the tension on a helical spring
Length of helical stirrups = 3.14*d*n + p*n d= diameter n= no. Of turne ( = height/ pithh) p = pitch of helical stirrups
a helical spring has N turns of coil of diameter D, and a second spring made of same material and of same wire diameter has N/2 turns of coil of diameter 2D. if stiffness of first spring is k, then stiffness of second spring is
Helical
Protein is a chemical family name. Its shape may be helical. But a helical shape is of a spring type item shape.
Some important assumptions made in the helical spring experiment include: linear elasticity, uniform material properties throughout the spring, neglecting the effects of stress concentration at the ends of the spring, neglecting friction between the coils, and assuming that the load is applied along the axis of the spring.
The angle which the axis of the spring wire makes with the horizontal line is known as helix angle.