I just completed this project and got 108% (:
Step 1) Put your paper longways and measure strips out that are: 2 1/2 inches, 2 inches, 1 1/2 inches, 1 inch, and 1/2 inch.
Step 2) Cut the strips out. (you should have a tiny bit of paper left, put that aside, you wont need it)
Step 3) Fold all the strips of paper in half, they should look like triangles missing a side.
Step 4) In order from biggest to smallest (biggest being the bottom) you should put the triangles inside each other (the small one inside the big one by about 1 cm.) tape the little piece of the small on inside both sides of the bigger one.
Step 5) Keep doing this until you've used all the paper strips you cut out(:
I got 54 inches, and I made this design up myself (:
Good Luck! (:
lick it
kill chicken fry chicken eat chicken Yumm KFC
In the old testament book of Genesis, chapter 11 you can read about the Tower of Babel. The people that lived then wanted to build a tower that would reach to the heavens. They wanted to make a name for themselves. Everyone spoke the same language and they had the ability to build a great tower and God knew that if he made them all speak different languages, they would not be able to communicate and build the tower.
The Black Mountain Tower (also known as The Telstra Tower) is 195.2m tall.
To determine how many pennies it would take to build a tower that is 5 cm tall, we first need to know the thickness of a penny. A standard U.S. penny is approximately 1.52 mm thick. Therefore, to convert 5 cm to mm, we get 50 mm. Dividing 50 mm by 1.52 mm per penny gives us about 32.89, meaning it would take approximately 33 pennies to reach a height of 5 cm.
To build a 65-inch paper tower with 1 sheet of paper and 12 inches of scotch tape, you can roll the paper into a tight cylinder to create the tower structure. Then, use the scotch tape to secure the edges of the paper cylinder to keep it in place and maintain the height of the tower. Make sure to tape the edges securely to prevent the tower from collapsing.
peanut butter
dnt know how to do this help please
scrunch up lots of paper balls and stickytape them together in a tower shape :]
go to youtube
lick it
To build a paper tower out of one paper, begin by rolling the paper tightly into a cylinder to create the base of the tower. You can then fold and shape the remaining paper to create additional levels of the tower, stacking them on top of each other to increase the height of the tower. Be sure to secure each level in place to prevent the tower from toppling over.
kill chicken fry chicken eat chicken Yumm KFC
To make a paper tower, you can start by rolling a piece of paper into a tight cylinder to form the base. Then, continue rolling more paper strips around the base to build height. Make sure to secure each layer with glue or tape to keep the tower stable as you build it taller. Keep adding layers until you reach your desired height for the tower.
I Build the Tower was created in 2006.
The duration of I Build the Tower is 1.45 hours.
it was build in Paris, France it took from 1887 to 1889 to build the Eiffel tower