Best Answer

To find the volume of a cylinder you need to use (Pi) 3.14159 times the radius squared times the length then divide by 231 if the piping is in inches or times by 7.48 if the cylinder is in feet

The only time height is a concern is if your you're going to figure static head or force

The volume does not change if it is a cylinder standing straight up or on its side

Q: How do you calculate volume of a pipe?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe

When you calculate the volume of pipe(or cylinder, as I prefer calling it), you need to know 2 things; the height of the cylinder and the radius of the circle(base of the cylinder). Then you use this formula; hpr^2 (height * pi * radius)

You need the inside radius (1/2 the inside diameter) of the pipe and the pipe's length. Then, use this formula:Volume = Pi x r2 x length

If we assume that the pipe is completely full of oil, it would just be the volume of the pipe = pi * r2 * l, where pi = 3.14159, r = radius, and l = length of the pipe. If the pipe is not full, then multiply the volume by the percentage of oil in the pipe. For example, if 50% full, then multiply by .5. If the pipe bends, take into account the different volume of the bend. If the bend is 90 degrees, this can be accomplished by taking the average length of the two bent segments for the length.

Use the formula for a cylinder to calculate the volume. This volume will be in cubic feet; you can then convert that to gallons.

Related questions

267

Use the formula for a cylinder.

You calculate its volume, look up the density of bronze, then multiply volume x density to get mass. Probably that's what you want; if you really want weight, you multiply mass x gravity to get the weight.

measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe

This cannot be done without knowing both the width and length of pipe.

To calculate the volume of a pipe, you can use the formula for the volume of a cylinder: Volume = πr^2h where r is the radius of the pipe and h is the height (length) of the pipe. Measure the radius and length of the pipe, plug them into the formula, and solve for the volume in cubic units.

Go to: http://www.techcalcs.com/calculators/pipeprop.php and use the calculator Otherwise calculate the volume displaced by the pipe and multiply by the density of the displaced water. This gives the bouyancy of the pipe

To calculate the weight of an HDPE pipe, you can use the formula: Weight = Volume × Density. First, calculate the volume of the pipe using the formula for the volume of a cylinder (πr²h, where r is the radius and h is the height), and then multiply it by the density of HDPE to get the weight. Density of HDPE can range from 0.93 to 0.97 g/cm³ depending on the grade.

When you calculate the volume of pipe(or cylinder, as I prefer calling it), you need to know 2 things; the height of the cylinder and the radius of the circle(base of the cylinder). Then you use this formula; hpr^2 (height * pi * radius)

Find the volume in cubic feet and multiply by 7.48

You need to know the radius (1/2 the inside diameter) and the length of the pipe. Then, you use this formula to calculate the volume:Pi (3.1416) x r2 x length

The volume of water in a pipe can be calculated using the formula: volume = area x length. For a 22mm pipe, the area can be calculated using the formula for the area of a circle: πr^2, where r is the radius (11mm). The length of the pipe in this case is 1 meter. By substituting these values into the formula, you can calculate the volume of water in the pipe.