there are two sensors on a 2000 metro one right after the exhaust manifold and one after the convertor they unscrew like a spark plug if you cant get them out with an adjustable wrench there is a special socket you can get at any auto parts store. then they just unplug at the connector rout the new ones just like the old ones
The answer would be relative. Not all metro newspapers weigh the same.
metro is Spanish for meter and metro means 24 inches
The Paris Metro has 16 lines and 303 stations. It opened for service in July of 1900 and has 1.527 billions riders each year.
Metro Cebu has 74,209 hectares..
8.3 metro = 830 cm
you gotta take the old one out first
to change o2 sensor ,you need to buy a o2 sensor socket from a parts store then disconnect neg terminal on battery ,after that disconnect wire connecter on o2 sensor and remome o2 sensor
can you change the alternator belt in a 1998 Chevy metro from under the car.
under he motor mount
It is possible as the signal from the oxygen sensor is sent to the computer
it is located on the head
I have a 1998 Metro with the 1.3l and the Camshaft Position Sensor is located on the bottom of the oil pan.
that must be some metro to have a big block
In front of and behind the catalytic converter.
I have a 99 Metro 1.3L. This car has two oxygen sensors, one in the exhaust manifold and the other is after the Catalytic Converter. Hope that helps.
If I'm not mistaken you have to get underneath to change it. Should be a cap underneath it.
NO cable. it has a vehicle speed sensor bolted into the transmission. Electronic controlled.